RHS 14° cnc'd iron heads and 3 piece intake
Moderator: Team
-
- New Member
- Posts: 9
- Joined: Wed Sep 15, 2021 8:52 pm
- Location: Arkansas
RHS 14° cnc'd iron heads and 3 piece intake
RHS 14° steel heads complete, ready to bolt on and matching intake. Jesel shaft rockers, Ferrea valves, Pac springs, titanium retainers. Edelbrock 2846 2 piece intake and 2856 valley plate, comp offset roller lifters
-
- New Member
- Posts: 9
- Joined: Wed Sep 15, 2021 8:52 pm
- Location: Arkansas
Re: RHS 14° cnc'd iron heads and 3 piece intake
Will trade for 23° 215cc runner or bigger heads. If anyone has a set of 23° heads, im also looking to buy a set
-
- New Member
- Posts: 9
- Joined: Wed Sep 15, 2021 8:52 pm
- Location: Arkansas
Re: RHS 14° cnc'd iron heads and 3 piece intake
I have a new set of rhs 230cc intake 72 cc combustion chamber new in box for 500. Located in North Mississippi.
Re: RHS 14° cnc'd iron heads and 3 piece intake
How much for the setup,Streetstock35 wrote: ↑Sat Sep 18, 2021 3:32 am RHS 14° steel heads complete, ready to bolt on and matching intake. Jesel shaft rockers, Ferrea valves, Pac springs, titanium retainers. Edelbrock 2846 2 piece intake and 2856 valley plate, comp offset roller lifters
-
- HotPass
- Posts: 596
- Joined: Sun Jul 30, 2017 2:24 pm
- Location: Summer Shade, Ky
Re: RHS 14° cnc'd iron heads and 3 piece intake
Aren't they 235cc. Are they aluminum or cast? angle or straight plug ? are they 2.08 intake valves ? Dan
-
- HotPass
- Posts: 596
- Joined: Sun Jul 30, 2017 2:24 pm
- Location: Summer Shade, Ky
Re: RHS 14° cnc'd iron heads and 3 piece intake
Thanks for checking . already have 220's but I'll keep them in mind. Dan
-
- New Member
- Posts: 1
- Joined: Thu Oct 28, 2021 8:28 am
- Location: North Carolina
Re: RHS 14° cnc'd iron heads and 3 piece intake
Hello are the heads still available, I have a Set of Dart raised runner complete with shaft rockers..