BLP RapidJet Metering Blocks (2)

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
BradH
Guru
Guru
Posts: 1186
Joined: Wed Apr 03, 2013 11:34 am
Location:

BLP RapidJet Metering Blocks (2)

Post by BradH »

This is a new pair of BLP RapidJet blocks that come with the following sets of 4-each interchangeable cartridges:
(4) .033 IFR, .060 PVCR, 2 .026 e-holes at top & middle locations >> KVG2 <<
(4) .030 IFR, .056 PVCR, 1 .024 e-hole at top location >> JUF1; semi-finished to allow for custom tune <<
(4) .033 IFR, .060 PVCR, 2 .029 e-holes in approx the same location as standard Holley 2-emulsion blocks >> NVH3 w/ original e-holes and IFRs soldered closed, then re-drilled <<

BLP no longer offers RapidJets, although they may have some cartridges still on hand. The price for my blocks and all the associated parts & hardware is $110 shipped in lower 48 United States.

I accept only cash, U.S.P.S. Money Orders or PayPal as payment. Sorry, NO international shipments and NO cashier's checks.

PM me here, or text me at 7zero3.threeOne7.7nine8seven. I'm near Washington, D.C., so please keep in mind I'm on Eastern Standard Time

Here's a link to pics and other info I posted about them on the old Racing Fuel Systems forum: https://www.tapatalk.com/groups/racingf ... t2273.html

NOTES:
1. Requires (4) 10-32 shouldered air bleeds (typical replaceable MAB) for the screw-in siphon break circuits; suggested starting size is .026 - .028"
2. Cartridge calibrations can be soldered closed and re-drilled as applicable to change tune
3. RapidJet blocks do not have provisions for jet extensions, although they can be fabricated (see link above)
BradH
Guru
Guru
Posts: 1186
Joined: Wed Apr 03, 2013 11:34 am
Location:

Re: BLP RapidJet Metering Blocks (2)

Post by BradH »

SOLD
Post Reply