Hey, does anyone have a pair of 4-1 merge collectors they're looking to get rid of?
I'm hoping for some that slip fit onto 1-7/8 tubes, with 2.5" choke and 3" outlet..
Not looking for anything fancy, used and mild steel is fine, I have some 4-1 headers I'm looking to put them on for testing pipemax suggestions
Thanks
Merge collectors wanted
Moderator: Team
-
- Pro
- Posts: 231
- Joined: Tue Apr 21, 2015 8:49 pm
- Location: Quinton/Richmond VA
Re: Merge collectors wanted
There use to be merge collector of all kind on eBay really cheap check it out they still may be doing them.
-
- Pro
- Posts: 231
- Joined: Tue Apr 21, 2015 8:49 pm
- Location: Quinton/Richmond VA
Re: Merge collectors wanted
Yea I checked them out, the guy in England doesn't quite have the sizes I'd like to test and the other dude with the $90 ones doesn't have any 1-7/8 ones either...
Thanks for the heads up
Thanks for the heads up
Re: Merge collectors wanted
Maybe make your own?
https://www.coneeng.com/assembling_slip ... ector.html
https://www.coneeng.com/assembling_slip ... ector.html
Jim
-
- Guru
- Posts: 6386
- Joined: Tue Jul 24, 2012 11:15 am
- Location: Roseville, Michigan (just north of Detroit)
- Contact:
Re: Merge collectors wanted
Schoenfeld ... has them new = p/n SOM8253054chevkiwi wrote: ↑Fri Sep 02, 2022 8:04 am Hey, does anyone have a pair of 4-1 merge collectors they're looking to get rid of?
I'm hoping for some that slip fit onto 1-7/8 tubes, with 2.5" choke and 3" outlet..
Not looking for anything fancy, used and mild steel is fine, I have some 4-1 headers I'm looking to put them on for testing pipemax suggestions
Thanks
http://www.rmcompetition.com
Specialty engine building at its finest.
Specialty engine building at its finest.
-
- Pro
- Posts: 231
- Joined: Tue Apr 21, 2015 8:49 pm
- Location: Quinton/Richmond VA
Re: Merge collectors wanted
I appreciate the suggestion Walter.. I have lost interest in the engine though. I can't afford to finish it to the standard it deserves anymore, especially in the exhaust department. And It's also not important for me to have an old car anymore, much less a 750hp one.. I just don't really care for it nowadays, different priorities, so it just still sits half assembled in my kitchenWalter R. Malik wrote: ↑Tue Nov 08, 2022 7:25 pmSchoenfeld ... has them new = p/n SOM8253054chevkiwi wrote: ↑Fri Sep 02, 2022 8:04 am Hey, does anyone have a pair of 4-1 merge collectors they're looking to get rid of?
I'm hoping for some that slip fit onto 1-7/8 tubes, with 2.5" choke and 3" outlet..
Not looking for anything fancy, used and mild steel is fine, I have some 4-1 headers I'm looking to put them on for testing pipemax suggestions
Thanks