Merge collectors wanted

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
54chevkiwi
Pro
Pro
Posts: 231
Joined: Tue Apr 21, 2015 8:49 pm
Location: Quinton/Richmond VA

Merge collectors wanted

Post by 54chevkiwi »

Hey, does anyone have a pair of 4-1 merge collectors they're looking to get rid of?

I'm hoping for some that slip fit onto 1-7/8 tubes, with 2.5" choke and 3" outlet..

Not looking for anything fancy, used and mild steel is fine, I have some 4-1 headers I'm looking to put them on for testing pipemax suggestions
Thanks
1972ho
Guru
Guru
Posts: 1299
Joined: Thu Nov 21, 2013 12:52 am
Location:

Re: Merge collectors wanted

Post by 1972ho »

There use to be merge collector of all kind on eBay really cheap check it out they still may be doing them.
54chevkiwi
Pro
Pro
Posts: 231
Joined: Tue Apr 21, 2015 8:49 pm
Location: Quinton/Richmond VA

Re: Merge collectors wanted

Post by 54chevkiwi »

Yea I checked them out, the guy in England doesn't quite have the sizes I'd like to test and the other dude with the $90 ones doesn't have any 1-7/8 ones either...
Thanks for the heads up
77cruiser
Guru
Guru
Posts: 1484
Joined: Fri Dec 29, 2006 10:32 pm
Location: I Falls MN
Contact:

Re: Merge collectors wanted

Post by 77cruiser »

Jim
Walter R. Malik
Guru
Guru
Posts: 6353
Joined: Tue Jul 24, 2012 11:15 am
Location: Roseville, Michigan (just north of Detroit)
Contact:

Re: Merge collectors wanted

Post by Walter R. Malik »

54chevkiwi wrote: Fri Sep 02, 2022 8:04 am Hey, does anyone have a pair of 4-1 merge collectors they're looking to get rid of?

I'm hoping for some that slip fit onto 1-7/8 tubes, with 2.5" choke and 3" outlet..

Not looking for anything fancy, used and mild steel is fine, I have some 4-1 headers I'm looking to put them on for testing pipemax suggestions
Thanks
Schoenfeld ... has them new = p/n SOM82530
http://www.rmcompetition.com
Specialty engine building at its finest.
54chevkiwi
Pro
Pro
Posts: 231
Joined: Tue Apr 21, 2015 8:49 pm
Location: Quinton/Richmond VA

Re: Merge collectors wanted

Post by 54chevkiwi »

Walter R. Malik wrote: Tue Nov 08, 2022 7:25 pm
54chevkiwi wrote: Fri Sep 02, 2022 8:04 am Hey, does anyone have a pair of 4-1 merge collectors they're looking to get rid of?

I'm hoping for some that slip fit onto 1-7/8 tubes, with 2.5" choke and 3" outlet..

Not looking for anything fancy, used and mild steel is fine, I have some 4-1 headers I'm looking to put them on for testing pipemax suggestions
Thanks
Schoenfeld ... has them new = p/n SOM82530
I appreciate the suggestion Walter.. I have lost interest in the engine though. I can't afford to finish it to the standard it deserves anymore, especially in the exhaust department. And It's also not important for me to have an old car anymore, much less a 750hp one.. I just don't really care for it nowadays, different priorities, so it just still sits half assembled in my kitchen
Post Reply