DH-8101-NE-B-4"
With end cap and bolt.
1-1/4" diameter.
Has the centering ring for an msd crank trigger. I lathed the register off the ring so the mandrel slides through into the balancer, this way the hex is far enough past the crank trigger you can get a tool on it.
I ended up making my own 3 bolt style so didn't use this. Centering ring needs a slot broached or filed in it to fit your woodruff key.
$80 free shipping.
I also have this bare 3 bolt style, this I bought used for mock up and it was too short for me, also 1-1/8" diameter.
On this one I cut the register a thou or 2 to fit inside an msd crank trigger without the centering ring, it just wouldn't quite fit before
$40 free shipping
Jones crank mandrels
Moderator: Team
-
- Pro
- Posts: 231
- Joined: Tue Apr 21, 2015 8:49 pm
- Location: Quinton/Richmond VA
Jones crank mandrels
You do not have the required permissions to view the files attached to this post.