Speed-Talk is running on www.Speed-Talk.com

IMPORTANT: Update your bookmarks to https://www.speed-talk.com/forum/
(Right-click the URL and select "Bookmark this link")

Heavy metal drills and reamers -SOLD

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
User avatar
Dave Koehler
Vendor
Posts: 6980
Joined: Mon Oct 04, 2004 11:19 pm
Location: Urbana, IL USA
Contact:

Heavy metal drills and reamers -SOLD

Post by Dave Koehler »

A few years ago I began boring the holes and these have been gathering dust.
Someone should put them back in service.
$200.00 plus ups
Urbana, Il
217-531-1770 9-5 CST
credit cards accepted

1 - 15/32 drill
1 - 1/2" reamer
1 - 19/32 drill
1- 5/8" reamer
1 - 23/32 drill
1 - 3/4" reamer
1 - 27/32 drill undercut
1 - 7/8" reamer undercut
2 - 31/32 drill
1 - 31/32 drill undercut
1 - 1" reamer undercut

heavymetalinstall.jpg
You do not have the required permissions to view the files attached to this post.
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
ec1
Member
Member
Posts: 136
Joined: Wed Dec 04, 2013 6:03 pm
Location:

Re: Heavy metal drills and reamers

Post by ec1 »

Pm sent
User avatar
Dave Koehler
Vendor
Posts: 6980
Joined: Mon Oct 04, 2004 11:19 pm
Location: Urbana, IL USA
Contact:

Re: Heavy metal drills and reamers -SOLD

Post by Dave Koehler »

Sold, Thanks EC1
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
In-Tech
Vendor
Posts: 2509
Joined: Wed Apr 21, 2010 4:35 am
Location: Fresno, CA

Re: Heavy metal drills and reamers -SOLD

Post by In-Tech »

That was a smokin' deal. I'm a tool junkie like most of us and I looked at your ad a couple times, I didn't want them sittin in a drawer never used either. Hopefully went to a good home :hello2:
Heat is energy, energy is horsepower...but you gotta control the heat.
-Carl
Post Reply