Cyl head tools wanted
Moderator: Team
Cyl head tools wanted
I'm looking for a heavy duty (head off engine) pneumatic valve spring compressor, such as a MTI, SPS, or a Kline 9000. Also looking for a quality bench valve spring tester that will test up to at least 1000lbs. Just thought I'd check in here to see if anybody had anything collecting dust in the shop before I spend the money and buy new. Let me know if you have anything. Thanks, Brian
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: Cyl head tools wanted
Joe Baker Equipment has Rimac Spring testers on sale now. 1000lb model $645.00
Real Race Cars Don't Have Doors
Re: Cyl head tools wanted
I scored a Rimac on ebay so that is taken care of. Still need a good spring compressor though.
Re: Cyl head tools wanted
Brian W wrote:I scored a Rimac on ebay so that is taken care of. Still need a good spring compressor though.
What ever you do.....DO-NOT send it back to Rimac for calibration.
Keith
“If I hit you with this you’re going to be numb, that’s why they call them numb-chucks “Si Robertson
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: Cyl head tools wanted
X2k-star wrote:Brian W wrote:I scored a Rimac on ebay so that is taken care of. Still need a good spring compressor though.
What ever you do.....DO-NOT send it back to Rimac for calibration.
Keith
They are real easy to reset your self. You just need the correct checking spring for the 500 or 1000 lb tester
Real Race Cars Don't Have Doors