Anyone know where I could locate collets for a Atlas collet chuck that was designed for the Tobin Arp 19000 qand 20000
seat and guide machine or a Sunnen VGS 20 machine.
This was made or supplied by Atlas before Kline bought them out
I did try K line buy they were no help.
The sunnen collet chuck uses ER 20-30 style collets but the Atlas chuck has a larger center allowing larger reamers to be used
Any leads would be a big help
Thanks again
Dave
Atlas/Sunnen VGS 20 collet chuck collets
Moderator: Team
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: Atlas/Sunnen VGS 20 collet chuck collets
any pictures I have a vgs20 and can't picture of what you need
-
- Pro
- Posts: 234
- Joined: Fri Sep 26, 2008 12:00 am
- Location: Northeastern PA
Re: Atlas/Sunnen VGS 20 collet chuck collets
I have a Goodson sold, T Meyer branded one that takes DA180 collets.
Not sure its the same as atlas but its definitely not the Sunnen with the er collets.
Largest collet is 3/4"
Will get you pictures if it helps.
Not sure its the same as atlas but its definitely not the Sunnen with the er collets.
Largest collet is 3/4"
Will get you pictures if it helps.