Winona floating head fixture
Moderator: Team
Winona floating head fixture
I saw this and just wanted to mention it in case anyone here is looking for one. I have no connection with the OP, his email is in the header as gunnerasch@gmail.com. Here's the thread: https://groups.google.com/forum/#!msg/r ... PVoAIwBQAJ, and a link to a picture in the thread is: https://photos.app.goo.gl/oTCDT2wiHH35sXM5A.
Carl Ijames, chemist not engine builder
carl ddott ijames aatt verizon ddott net
carl ddott ijames aatt verizon ddott net
-
- HotPass
- Posts: 5
- Joined: Thu Nov 07, 2019 10:49 am
- Location: OH
Re: Winona floating head fixture
Thanks for the heads up. I don't know where that guy is but I replied. I have a PH2000 and my cradle is mint as well but I'd be happy to grab that one for a just in case type scenario.
Thanks,
Nathan
Thanks,
Nathan
-
- Guru
- Posts: 8686
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: Winona floating head fixture
Recently I seen a roll over cradle like that go for $500 I wanted it for a mill project but missed it by a couple hours.
It was in PA some where
It was in PA some where
Real Race Cars Don't Have Doors
Re: Winona floating head fixture
He's near Los Angeles. If anyone gets a reply and it's gone, please post here so we all know.
Carl Ijames, chemist not engine builder
carl ddott ijames aatt verizon ddott net
carl ddott ijames aatt verizon ddott net