Cam Bearing R&R tooling SOLD
Moderator: Team
- Dave Koehler
- Vendor
- Posts: 7205
- Joined: Mon Oct 04, 2004 11:19 pm
- Location: Urbana, IL USA
- Contact:
Cam Bearing R&R tooling SOLD
Lisle Cam Bearing removal and installation tool.
Bearing ID sizes 1-1/8" - 2.690"
Near new.
$100.00 plus UPS
Urbana, IL
Call days, 9-5 CST
Ccards and paypal accepted.
Bearing ID sizes 1-1/8" - 2.690"
Near new.
$100.00 plus UPS
Urbana, IL
Call days, 9-5 CST
Ccards and paypal accepted.
You do not have the required permissions to view the files attached to this post.
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
- Dave Koehler
- Vendor
- Posts: 7205
- Joined: Mon Oct 04, 2004 11:19 pm
- Location: Urbana, IL USA
- Contact:
Re: Cam Bearing R&R tooling
Lisle is USA.
need full address for UPS ship calc
Dave Koehler
need full address for UPS ship calc
Dave Koehler
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Re: Cam Bearing R&R tooling
2948 Casa Nuestras Way Carmichael, CA 95608 What method of payment would work for you ? Normally I just send old fashioned checks. I think the wife still has a paypal account, if I can figure out how it works.
- Dave Koehler
- Vendor
- Posts: 7205
- Joined: Mon Oct 04, 2004 11:19 pm
- Location: Urbana, IL USA
- Contact:
Re: Cam Bearing R&R tooling
Just noticed this. Back at you in a little while.
Payment is normally Ccard or paypal.
I will take a check but be aware the tool won't leave here until I am darn sure the check has cleared.
That can mean a couple of days to a couple of weeks.
If you can wait I am good with the check.
Payment is normally Ccard or paypal.
I will take a check but be aware the tool won't leave here until I am darn sure the check has cleared.
That can mean a couple of days to a couple of weeks.
If you can wait I am good with the check.
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Re: Cam Bearing R&R tooling
Dave, the boss (wife) says for me to just send you two emails with the credit card # (Visa) . I saw on your website a gmail account, I will send the email to that . Let me know on shipping when you get a chance. This is not a rush.
Thanks
Gordon Tarbell
Thanks
Gordon Tarbell
- Dave Koehler
- Vendor
- Posts: 7205
- Joined: Mon Oct 04, 2004 11:19 pm
- Location: Urbana, IL USA
- Contact:
Re: Cam Bearing R&R tooling
Sold
On it's way via the brown truck.
Thanks Gordon
On it's way via the brown truck.
Thanks Gordon
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Re: Cam Bearing R&R tooling
Got it last night, Thank you Dave. Will use it this week end , perfect timing.
- Dave Koehler
- Vendor
- Posts: 7205
- Joined: Mon Oct 04, 2004 11:19 pm
- Location: Urbana, IL USA
- Contact:
Re: Cam Bearing R&R tooling
Have fun.
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."