Sharing for a friend from another site:
Hi all,
An auto teacher friend of mine died a year and a half ago.
He had a very successful engine machining business on the
side. His wife would like to sell the equipment. Her
preference would be that an auto tech school or instructor
buy it. But an interested shop would be welcome as well. It
is all located in the outskirts of Vancouver, Washington.
She is looking to get $25,000 for it which is WAY less than
it is worth. She may be able to do a partial donation if
sold to a school.
Here is a list of the equipment:
Sunnen CV-616 Cylinder Hone - plus accessories
Sunnen - Line Hone - Plus accessories
Sunnen Rod Machine LBB-1810 - plus mandrels
Sunnen Cap Grinder
Sunnen - Rod Heater
3 Phase Converter
Winona RV-12 NR8654 Seat & Guide Machine - plus accessories
Valve Facer
Winona Surfacer
Large Peterson Surfacer
Kwik-Way Jet Spray Washer
Sioux Bead Tumbler
Polamco TUM35 Metal Lathe - Plus accessories
Cam Bearing Drive Set
Several Bolt Bins, Metal Benches, Misc Engine Kits,
Plus lots of extra stuff
Here is a link to pictures: https://www.flick...hotos/189165660@N03/ [flickr.com]
My email address for any questions is:
kvangelder@cdxauto.com [mailto]
Thanks all!
Kirk
Kirk VanGelder
Educator/Instructor
Clark County Skills Center
Vancouver, Washington, USA
Machine Shop Equipment for sale in Washington State
Moderator: Team
-
- Guru
- Posts: 1745
- Joined: Wed Aug 26, 2009 8:30 pm
- Location: Beautiful Southern Maryland
- Contact:
Machine Shop Equipment for sale in Washington State
Bill Koustenis
Advanced Automotive Machine
Waldorf Md
www.enginerepairshop.com
Advanced Automotive Machine
Waldorf Md
www.enginerepairshop.com
Re: Machine Shop Equipment for sale in Washington State
Don Dennis told me he bought this complete shop recently, so is the info still active?
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering
Studebaker-Packard V8 Limited
Obsolete Engineering