needed Land and Sea parts
Moderator: Team
-
- Guru
- Posts: 1944
- Joined: Tue Sep 15, 2015 2:25 pm
- Location:
needed Land and Sea parts
I don't have to heave a spare but I would like to have one. Got a 13 inch land and sea dyno, and i have to water brakes with it. I lost a bearing in the one so I am running with my spare till I get it fixed. I the end of the shaft that comes out of the brake is a sleeve with splines held in with three roll pins. If anybody has one they would sell or knows who may have one let me know. It looks a little difficult to machine and is hard to get pressed out a to swap brakes. Would like to have one for each brake. Probably 1990's vintage dyno
You do not have the required permissions to view the files attached to this post.
Re: needed Land and Sea parts
I have a good used Land and sea dyno that was purchased from a Votech school. Unit was not suitable for my diesel engine use. would like to sell complete. 2700