Page 1 of 1
.375 ball head drivers
Posted: Mon Sep 05, 2022 11:25 am
by bentvalves
anybody have anything, with or without the tool holding "forks" ?
Re: .375 ball head drivers
Posted: Fri Sep 16, 2022 11:55 am
by Bossman
i have a few for the large valve seats 2 -2.5 dia.that i don't use anymore
Re: .375 ball head drivers
Posted: Thu Sep 22, 2022 10:18 am
by bentvalves
Bossman wrote: ↑Fri Sep 16, 2022 11:55 am
i have a few for the large valve seats 2 -2.5 dia.that i don't use anymore
so the tool holding "fork" is for the larger stuff. but the ball head driver is a ball head driver I assume?
could you send me some pics?
Interested.
Re: .375 ball head drivers
Posted: Sun Oct 16, 2022 4:05 pm
by Bossman
no it's specific to the size of seat you use it on, the smaller one have a few different size range but the large ones i have are for 2' and larger seats up to about 3 '
Re: .375 ball head drivers
Posted: Sun Oct 16, 2022 4:07 pm
by Bossman
bentvalves wrote: ↑Thu Sep 22, 2022 10:18 am
Bossman wrote: ↑Fri Sep 16, 2022 11:55 am
i have a few for the large valve seats 2 -2.5 dia.that i don't use anymore
so the tool holding "fork" is for the larger stuff. but the ball head driver is a ball head driver I assume?
could you send me some pics?
Interested.
i'll get you some pics
Re: .375 ball head drivers
Posted: Tue Oct 25, 2022 8:04 pm
by Bossman
Bossman wrote: ↑Sun Oct 16, 2022 4:07 pm
bentvalves wrote: ↑Thu Sep 22, 2022 10:18 am
Bossman wrote: ↑Fri Sep 16, 2022 11:55 am
i have a few for the large valve seats 2 -2.5 dia.that i don't use anymore
so the tool holding "fork" is for the larger stuff. but the ball head driver is a ball head driver I assume?
could you send me some pics?
Interested.
i'll get you some pics
Man i appologize i just made a note to get you some pics tomorrow, we have been balls to the wall w/ work
Re: .375 ball head drivers
Posted: Thu Oct 27, 2022 11:21 am
by Bossman
IMG_0916.JPG
picture of ball heads together shows the large and smaller ball head tool w/ same ball head size, tape shows from center of pilot to outside distance of cutter blade which would be roughly 3"
Re: .375 ball head drivers
Posted: Tue Nov 08, 2022 11:44 pm
by scotts439
did these sell to OP? If still for sale, please PM me the price.