We have a few finished cams on the shelf

Post Reply
User avatar
CamKing
Guru
Guru
Posts: 10709
Joined: Wed Aug 08, 2007 4:05 pm
Location: Denver, NC
Contact:

We have a few finished cams on the shelf

Post by CamKing »

We normally don't stock finished cams, but for various reasons, we have a few finished cams on the shelf, ready to ship. If you're needing something right away, and one of these will fit your application, give us a call (704)489-2449 M-F, 9am-5pm.


SB Chevy, Standard Journal size, Std firing order
Mechanical Roller cam. # SBC, R82465-84455-110
274/280@.050"
.465"/.455" Lobe Lift
.930" Base Circle
110 LSA

SB Chevy, Standard Journal size, Std firing order
Mechanical Flat Tappet cam. # SBC, M72332-106
234/234@.050"
.332"/.332" Lobe Lift
1.190" Base Circle
106 LSA

LS1 Chevy, Standard Journal size, Std firing order
Hydraulic Roller cam. # LS1, HR75375-78360-116
244/254@.050"
.375"/.360" Lobe Lift
1.410" Base Circle
116 LSA

460 Ford, Standard Journal size, Std firing order
Mechanical Flat Tappet cam. # F460, M79378-82375-112
260/270@.050"
.378"/.375" Lobe Lift
1.360" Base Circle
112 LSA
Mike Jones
Jones Cam Designs

Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Post Reply