TorqueMaster cam program update

Moderator: David Vizard

User avatar
Stan Weiss
Vendor
Posts: 4801
Joined: Tue Feb 20, 2007 1:31 pm
Location: Philadelphia, PA
Contact:

Re: TorqueMaster cam program update

Post by Stan Weiss »

CMIdiesel47448 wrote: Mon Aug 10, 2020 1:34 pm I'm getting an error every time I try to download the zip file. Any thoughts?

Also, assuming I can get this resolved, anyone know the "Induction Length" that should be used for a Super Victor EFI (29245) manifold?

Thanks, Damon
Damon,
What error are you getting. I just click the link and had no problems.

Stan
download.gif
You do not have the required permissions to view the files attached to this post.
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
skinny z
HotPass
HotPass
Posts: 2642
Joined: Tue Mar 11, 2008 8:42 am
Location: AB. CA.

Re: TorqueMaster cam program update

Post by skinny z »

CMIdiesel47448 wrote:
anyone know the "Induction Length" that should be used for a Super Victor EFI (29245) manifold?

Thanks, Damon

Seeing as it may be modelled after the traditional Super Vic (non EFI), you may find that info at Speier'S website.

http://speierracingheads.com/manifold-lengths.html
skinny z
HotPass
HotPass
Posts: 2642
Joined: Tue Mar 11, 2008 8:42 am
Location: AB. CA.

Re: TorqueMaster cam program update

Post by skinny z »

Further to the above, add to the manifold runner length the length of the intake port on the particular head you're using.
I think you'll find though the intake tract part of the program doesn't physically change the cam spec generated. It's more of a tool for determining where a given intake length will make peak torque. It's then a matter of manipulating that length to work with the cam.
At least that's how my free trial version of TM played out.
That, and a great deal of resistance from the resident internet forum experts.
CMIdiesel47448
New Member
New Member
Posts: 11
Joined: Fri Aug 07, 2020 11:37 pm
Location: Nashville, IN, USA

Re: TorqueMaster cam program update

Post by CMIdiesel47448 »

Thank you Stan, worked fine today...
CMIdiesel47448
New Member
New Member
Posts: 11
Joined: Fri Aug 07, 2020 11:37 pm
Location: Nashville, IN, USA

Re: TorqueMaster cam program update

Post by CMIdiesel47448 »

Thanks skinnyz!
skinny z
HotPass
HotPass
Posts: 2642
Joined: Tue Mar 11, 2008 8:42 am
Location: AB. CA.

Re: TorqueMaster cam program update

Post by skinny z »

CMIdiesel47448 wrote:
> Thanks skinnyz!

I'll be interested in your feedback on TM.
It was a hard sell for just about anybody I engaged with regarding it's functionality or accuracy. Personally I have a pretty good understanding but those on the outside looking in just tend to criticize.
CMIdiesel47448
New Member
New Member
Posts: 11
Joined: Fri Aug 07, 2020 11:37 pm
Location: Nashville, IN, USA

Re: TorqueMaster cam program update

Post by CMIdiesel47448 »

Actually looks like that SRH stuff if all Chevy. Anyone have a good number for 2924/29245 (Super Victor 351W) combined with AFR 220 Competition head? Assume it should be pretty close to the DV 408 build from several years ago. This is a 408W as well...

Thanks, Damon

skinny z wrote:
> CMIdiesel47448 wrote:
> anyone know the "Induction Length" that should be used for a
> Super Victor EFI (29245) manifold?
>
> Thanks, Damon
>
> Seeing as it may be modelled after the traditional Super Vic (non EFI), you
> may find that info at Speier'S website.
>
> http://speierracingheads.com/manifold-lengths.html
User avatar
Stan Weiss
Vendor
Posts: 4801
Joined: Tue Feb 20, 2007 1:31 pm
Location: Philadelphia, PA
Contact:

Re: TorqueMaster cam program update

Post by Stan Weiss »

I have done some housekeeping in this thread. The trail programs were all outdated and would not run anymore, so I removed them . The software User manual was also outdated and I removed it also. I have uploaded the latest User manual in this post.

Stan

tmc.pdf
You do not have the required permissions to view the files attached to this post.
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
skinny z
HotPass
HotPass
Posts: 2642
Joined: Tue Mar 11, 2008 8:42 am
Location: AB. CA.

Re: TorqueMaster cam program update

Post by skinny z »

Hi Stan

What's the latest with Torque Master?
It seems that the original webstore is no longer. I'd be interested in another go around with the program.
Thanks.
Kevin
User avatar
Stan Weiss
Vendor
Posts: 4801
Joined: Tue Feb 20, 2007 1:31 pm
Location: Philadelphia, PA
Contact:

Re: TorqueMaster cam program update

Post by Stan Weiss »

skinny z wrote: Sat Dec 03, 2022 10:54 am Hi Stan

What's the latest with Torque Master?
It seems that the original webstore is no longer. I'd be interested in another go around with the program.
Thanks.
Kevin,
Yes, David's web site is down. I am not sure when there will anything up and running to replace it.

Stan
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
skinny z
HotPass
HotPass
Posts: 2642
Joined: Tue Mar 11, 2008 8:42 am
Location: AB. CA.

Re: TorqueMaster cam program update

Post by skinny z »

THAT is unfortunate.
Kevin
User avatar
Stan Weiss
Vendor
Posts: 4801
Joined: Tue Feb 20, 2007 1:31 pm
Location: Philadelphia, PA
Contact:

Re: TorqueMaster cam program update

Post by Stan Weiss »

I am not sure how long it will be before David can get something done.

I have put something together as a temporary fix. It has a much different look and feel then the old web site but should get the job done for now,

http://www.magneticlynx.com/DV

Stan
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
skinny z
HotPass
HotPass
Posts: 2642
Joined: Tue Mar 11, 2008 8:42 am
Location: AB. CA.

Re: TorqueMaster cam program update

Post by skinny z »

Stan Weiss wrote:
> I am not sure how long it will be before David can get something done.
>
> I have put something together as a temporary fix. It has a much different
> look and feel then the old web site but should get the job done for now,
>
> http://www.magneticlynx.com/DV
>
> Stan

Thanks Stan.
Purchase pending.
Kevin
User avatar
Stan Weiss
Vendor
Posts: 4801
Joined: Tue Feb 20, 2007 1:31 pm
Location: Philadelphia, PA
Contact:

Re: TorqueMaster cam program update

Post by Stan Weiss »

Right after the first of the year David had me stop selling the Torque Master Cams program.

I spoke with David last Friday. He said it as OK to sell the Torque Master Cams program BUT only doing SBC. I made the needed changes and it is now on the software store if you are interested. http://www.magneticlynx.com/DV/

Stan
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
User avatar
Stan Weiss
Vendor
Posts: 4801
Joined: Tue Feb 20, 2007 1:31 pm
Location: Philadelphia, PA
Contact:

Re: TorqueMaster cam program update

Post by Stan Weiss »

The other 14 Day has expired and will no run. This is the install package for a new 14 Day version of TMC. Note at this time TMC only does SBC.

Stan
tmc_day14_6_7_4_setup.zip
You do not have the required permissions to view the files attached to this post.
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
Post Reply