D V Live now.
Moderator: David Vizard
D V Live now.
Sort of, prerecorded but he can answer in the live chat.
and no Adult Video music intro.
https://youtu.be/clS50nsgQeQ
and no Adult Video music intro.
https://youtu.be/clS50nsgQeQ
Ignorance leads to confidence more often than knowledge does.
Nah, I'm not leaving myself out of the ignorant brigade....at times.
Nah, I'm not leaving myself out of the ignorant brigade....at times.
Re: D V Live now.
I’m a Street/Strip guy..... like to think outside the quadrilateral parallelogram.
Re: D V Live now.
That's a weird video, it's mostly about overlap and he keeps brining up LSA, then it's about intake closing in relation to compression and he fails to mention that and calls it LSA. Old mate obviously didn't need a low idle speed so he got away with his tight LSA, but the LSA he got was a resultant of what worked for him.HQM383 wrote: ↑Sat Oct 29, 2022 3:06 am More fresh DV on lobe sep angle
https://youtu.be/IjfwqgpspnA
Good on him for looking after David, but this LSA obsession is a negative for all involved.
Uncle Tony (Garage) touched on overlap recently and claimed nobody talks about that.
I'm just about finished with Championship winning youtubers, they won Championships because they put their all into it, not because their way is the only way.
They're all singing different Hymns from the same prayer book. It's really disrespectful to 130 years of ice engineering.
Last edited by Tom68 on Sat Oct 29, 2022 7:27 am, edited 1 time in total.
Ignorance leads to confidence more often than knowledge does.
Nah, I'm not leaving myself out of the ignorant brigade....at times.
Nah, I'm not leaving myself out of the ignorant brigade....at times.
Re: D V Live now.
You'll have to tell me what EMC is. EVC no.
Ignorance leads to confidence more often than knowledge does.
Nah, I'm not leaving myself out of the ignorant brigade....at times.
Nah, I'm not leaving myself out of the ignorant brigade....at times.
Re: D V Live now.
Sorry my bad, was just curious if he ever entered the "Engine Masters Challenge" contest.
Re: D V Live now.
Dunno, he brought up winning Championships (I've been involved in several Championships across several classes of racing) if you based an EMC challenge on LSA calculations you'd have to have a lot of luck on your side to pull a win.
Ignorance leads to confidence more often than knowledge does.
Nah, I'm not leaving myself out of the ignorant brigade....at times.
Nah, I'm not leaving myself out of the ignorant brigade....at times.
Re: D V Live now.
I don't think so. D.V. and Terry Walters entered the race engine challenge a few years ago. 743 hp from 420 ci Chevy with untouched Dart heads. I did the intake work for that build.
You do not have the required permissions to view the files attached to this post.
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST
631-816-4911
9:00am - 9:00pm EST
-
- Pro
- Posts: 449
- Joined: Tue Aug 09, 2022 9:20 am
- Location: US
Re: D V Live now.
That's the one Terry Walter's machined and built at his shop, that you did the intake on, and they used CNC'd Dart heads otb, just curious, what did David do on it? Nice job on the intake by the way.
Maximum power using simple logic and common sense
Re: D V Live now.
The heads were stock from Dart. D.V. did the combination, Terry built it. I had input on carb spacers and how I did the intake.
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST
631-816-4911
9:00am - 9:00pm EST
Re: D V Live now.
I think the heads were as cast not cnc.
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST
631-816-4911
9:00am - 9:00pm EST
-
- Pro
- Posts: 449
- Joined: Tue Aug 09, 2022 9:20 am
- Location: US
Re: D V Live now.
They were CNC.'d from Dart. You can find the info on here, the details are there.
Maximum power using simple logic and common sense
Re: D V Live now.
Yes, he used his torquemaster program.
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST
631-816-4911
9:00am - 9:00pm EST