Just received my first Brodix Dragon Slayer casting CNC. The beauty is this casting uses stud rockers!
*USES STUD Rockers
*242cc
*45º seats
*2.100/1.600
*2.60in MIN
*297 AVG FPS@.700
*5.600 port length
*2.64 AVG CSA
*Flowed on 4.155 fixture
NEW 242cc Brodix Dragon Slayer CNC
-
- Vendor
- Posts: 943
- Joined: Sun May 13, 2012 1:28 pm
- Location: KS
- Contact: