We are currently running on the new domain and server: www.Speed-Talk.com

IMPORTANT: Update your bookmarks to https://www.speed-talk.com/forum/
(Right-click the URL and select "Bookmark this link")

YouTube Videos

Post Reply
User avatar
ErsonCamShop
Vendor
Posts: 103
Joined: Fri Apr 25, 2014 4:23 pm
Location: Louisville, KY
Contact:

YouTube Videos

Post by ErsonCamShop » Fri Aug 09, 2019 7:38 am


Made a real quick video of piston to valve clearance with a cutaway cylinder head to try and help explain valve to piston clearance. I've had several customers confused that lift is the controlling factor in valve to piston clearance. Check this out and let me know what you think I could do to explain this a little better to the rookie engine builder.
Thanks
Russ
Russ Yoder
Erson Cams
Louisville, KY
ersoncamsshop@gmail.com
www.pbm-erson.com
800-641-7920
ext 8003 (John)
ext 1041 (Ryan)

autogear
Vendor
Posts: 494
Joined: Thu Dec 08, 2011 9:03 am
Location:

Re: YouTube Videos

Post by autogear » Fri Aug 09, 2019 9:45 am

COOL STUFF! Thanks for doing that

User avatar
BigBlockMopar
Momentary Specialist
Momentary Specialist
Posts: 278
Joined: Fri Mar 25, 2016 8:53 pm
Location: Netherlands
Contact:

Re: YouTube Videos

Post by BigBlockMopar » Sat Aug 10, 2019 5:13 pm

I think a more steady cam setup would be a bit better.
Perhaps showing which valve is which (front exh/rear int), or maybe put a red & blue tint on the valves, and at what stage/stroke the piston is at in the clip would be helpful.
With descriptions placed into the clip I would omit the noisy backgroundsound perhaps too.

Also, depending on the audience and website you want to show this, I would shoot the video in landscape (or both).

User avatar
Dave Koehler
Vendor
Posts: 4791
Joined: Mon Oct 04, 2004 11:19 pm
Location: Urbana, IL USA
Contact:

Re: YouTube Videos

Post by Dave Koehler » Mon Aug 12, 2019 8:01 pm

What Big block said plus the text should say approx where the closest points are for each valve.
Perhaps an overlay with a degree wheel would bring the point home that it is not TDC.
Dave Koehler - Koehler Injection
Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."

Post Reply