A modern -097 Duntov cam.

[falcongeorge]

I stuck an Isky Z-25 in my fake 270hp/283 copy. Haven't run it yet, its going in a T sedan with a 2.54 low T-10 and 4.11's

[ed nix]

[b][size=150][/size][/b]I have 2 of the original speck cams if any one wants one call 931-762-3977.

[pdq67]

I have 2 of the original speck cams if any one wants one call 931-762-3977.

I am assuming, "NOS" cams, right??

Are they both stamped -097 on one end like stock should be?

If so, How much you want for one of them?

pdq67

[Walter R. Malik]

I have 2 of the original speck cams if any one wants one call 931-762-3977.

I am assuming, "NOS" cams, right??

Are they both stamped -097 on one end like stock should be?

If so, How much you want for one of them?

pdq67

Stock O.E.M. Chevrolet will have the core number, (usually one number off from the part number), cast right in the core in front or behind the number 4 main journal.

[pastry_chef]

OP appears stuck on replay.
Seeing so many threads like this for the better part of 20 years and replies given are the same.
I've had nostalgia on some occasions, then learned letting go was many levels better.

[pdq67]

I have 2 of the original speck cams if any one wants one call 931-762-3977.

I am assuming, "NOS" cams, right??

Are they both stamped -097 on one end like stock should be?

If so, How much you want for one of them?

pdq67

I will buy one off you if it is indeed a NOS -097 cam??

PM me...

pdq67

[pdq67]

ed nix,

If they are NOS -097 solid lifter GM cams, I will buy one!!

PM me..........

pdq67

[Rob R]

pdq here is one that was recently sold on eBay.
$525. WOW!

https://www.ebay.com/itm/NOS-1957-63-Ch ... cvip-panel

[pdq67]

No thanks!!

pdq67