Ford 289 Camshaft Manifold Carburetor

Engine tech, for those engines, products, and technologies of yesteryear.

Moderator: Team

Post Reply
Heinz1
New Member
New Member
Posts: 34
Joined: Sat Sep 03, 2016 5:16 am
Location: Germany

Re: Ford 289 Camshaft Manifold Carburetor

Post by Heinz1 »

got the Fel-Pro 2901 rear main seals and measured them like Bill suggested.
They protrude 1.35mm / 0.053 inch on each corner.
I also measurded the leaking seals, and they protrude around 1.0mm / 0.039inch.
Now start sanding them down to 0.25mm / 0,010 inch, hope the will seal.
Top
Post Reply

Return to “Vintage/Classic/Historical Engine Tech”