239 Y bock again, who makes custom pistons?
Moderator: Team
They also changed the oil pump and distributor drive from a blade to the later hex. Additionally, the 239 (1954) intake manifold is a stand alone as are the matching heads...the interface angle, where the gasket goes, is different from all other Y blocks.
Some people can break a cannon ball, in a sand box, with their bare hands
Re: 239 Y bock again, who makes custom pistons?
MY WORD!!
BACK FROM THE DEAD!!
Great "Y" block info out the as*!!
IMHO, they could never keep up with the early SBC's but dam, good info here!!
pdq67
pdq67
BACK FROM THE DEAD!!
Great "Y" block info out the as*!!
IMHO, they could never keep up with the early SBC's but dam, good info here!!
pdq67
pdq67
- mt-engines
- Expert
- Posts: 879
- Joined: Fri Sep 27, 2019 12:35 pm
- Location: MN
Re: 239 Y bock again, who makes custom pistons?
Are you just trying to up your post count? Or do you just enjoy replying to posts that are 10-15 years old?