Guy's I'm in need of one new or good used Mahle Power Pack piston part number, SBC550165F05
This is for SBC, flat top, 1.550 ch, 4.165 bore or 5.7 rod w/3.480 crank weight is 503g, but I can deal with a non weight matching piston.
If I can't find a piston I may just move the top compression ring to the second groove and run it as a 2 ring piston. Valve head came detached and compressed top ring land, but piston is still usable if not for top ring land damage.
Gov
Mahle piston Mfg no longer sells
Moderator: Team
- Dave Koehler
- Vendor
- Posts: 7207
- Joined: Mon Oct 04, 2004 11:19 pm
- Location: Urbana, IL USA
- Contact:
Re: Mahle piston Mfg no longer sells
Machine/clean up the ring land? Perhaps going so far as to use a spacer.
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Re: Mahle piston Mfg no longer sells
Good thought, have never had to do that, but I will ck with a buddy who runs a small machine shop.
Gov
Gov
a passion for racing
Re: Mahle piston Mfg no longer sells
BTTT,
So anybody able to take a look to see what they may have on the odds and ends shelf?
Gov
So anybody able to take a look to see what they may have on the odds and ends shelf?
Gov
a passion for racing