alignment
Moderator: Team
-
- Member
- Posts: 101
- Joined: Sun Feb 25, 2007 2:26 pm
- Location:
alignment
having a hard time getting pos caster on rt ft 1963 dodge b body all parts are new thanks in advance
Re: alignment
Suggest you measure the mounts/frame dimensions. Being it's a "unibody, it may be tweaked. I had similar issue w/ my 6T5 hemi Belvedere.
We ended up pulling it back to specs, then adding frame ties and a cage. Luckily, we checked it B4 the cage was in!
We ended up pulling it back to specs, then adding frame ties and a cage. Luckily, we checked it B4 the cage was in!
Chuck L.
Hotrodding since 1955.
Injector Inspector.
Turbo Buicks in the 9's...
Hotrodding since 1955.
Injector Inspector.
Turbo Buicks in the 9's...