302/347 Trick Flow "R" manifold performance ?
Moderator: Team
-
- Guru
- Posts: 6389
- Joined: Tue Jul 24, 2012 11:15 am
- Location: Roseville, Michigan (just north of Detroit)
- Contact:
302/347 Trick Flow "R" manifold performance ?
Can anyone give me any feedback on the performance of the TFS-52400111 "R" series single plane intake manifold...?
They have been available for years yet, I can't get any results from anyone who has used one.
They have been available for years yet, I can't get any results from anyone who has used one.
http://www.rmcompetition.com
Specialty engine building at its finest.
Specialty engine building at its finest.
-
- Guru
- Posts: 6389
- Joined: Tue Jul 24, 2012 11:15 am
- Location: Roseville, Michigan (just north of Detroit)
- Contact:
Re: 302/347 Trick Flow "R" manifold performance ?
A 100 views and no replies.
Are people simply reluctant to give up their conclusions or, is it that there has not been any use either successfully or not over the years...?
Are people simply reluctant to give up their conclusions or, is it that there has not been any use either successfully or not over the years...?
http://www.rmcompetition.com
Specialty engine building at its finest.
Specialty engine building at its finest.
Re: 302/347 Trick Flow "R" manifold performance ?
slightly better than the super victor! On the 351W we built here (http://www.hotrod.com/how-to/engine/150 ... 1-windsor/) it was worth 4HP and 5TQ and 1.8 avg. HP and 1.9 avg. TQ through the pull from 4500 rpm to 7200rpm. All we did to it was mill it to fit the heads..no porting was done at all on either intake.
Brian
Brian
-
- Guru
- Posts: 6389
- Joined: Tue Jul 24, 2012 11:15 am
- Location: Roseville, Michigan (just north of Detroit)
- Contact:
Re: 302/347 Trick Flow "R" manifold performance ?
Well ... this is not the 351W intake manifold but, thanks anywayou812 wrote:slightly better than the super victor! On the 351W we built here (http://www.hotrod.com/how-to/engine/150 ... 1-windsor/) it was worth 4HP and 5TQ and 1.8 avg. HP and 1.9 avg. TQ through the pull from 4500 rpm to 7200rpm. All we did to it was mill it to fit the heads..no porting was done at all on either intake.
Brian
This manifold is for the 8.2" deck height 302 block.
http://www.rmcompetition.com
Specialty engine building at its finest.
Specialty engine building at its finest.
Re: 302/347 Trick Flow "R" manifold performance ?
Same principals used...we have an 8.2 deck intake that we are thinking of using in a nitrous build and comparing other intakes out there...plate system and 11R heads...just can't decide on a 302 or 347...
-
- Guru
- Posts: 6389
- Joined: Tue Jul 24, 2012 11:15 am
- Location: Roseville, Michigan (just north of Detroit)
- Contact:
Re: 302/347 Trick Flow "R" manifold performance ?
Maybe the same principles but, the 351W intake manifold is over an 1 1/4" wider; I would presume that should mean SOMETHING.ou812 wrote:Same principals used...we have an 8.2 deck intake that we are thinking of using in a nitrous build and comparing other intakes out there...plate system and 11R heads...just can't decide on a 302 or 347...
http://www.rmcompetition.com
Specialty engine building at its finest.
Specialty engine building at its finest.
Re: 302/347 Trick Flow "R" manifold performance ?
You can call Mike at Trickflow and ask him...not too difficult.
-
- Guru
- Posts: 6389
- Joined: Tue Jul 24, 2012 11:15 am
- Location: Roseville, Michigan (just north of Detroit)
- Contact:
Re: 302/347 Trick Flow "R" manifold performance ?
I would prefer some good independent evaluations from the marketplace.ou812 wrote:You can call Mike at Trickflow and ask him...not too difficult.
http://www.rmcompetition.com
Specialty engine building at its finest.
Specialty engine building at its finest.
Re: 302/347 Trick Flow "R" manifold performance ?
If you want to try it, I can send it to you as a loaner...I like them and think they should advertise them more...their dual plane intakes work very well too.
Brian
Brian
-
- Guru
- Posts: 6389
- Joined: Tue Jul 24, 2012 11:15 am
- Location: Roseville, Michigan (just north of Detroit)
- Contact:
Re: 302/347 Trick Flow "R" manifold performance ?
T T T ... hopefully for getting feedback
http://www.rmcompetition.com
Specialty engine building at its finest.
Specialty engine building at its finest.
-
- Guru
- Posts: 6389
- Joined: Tue Jul 24, 2012 11:15 am
- Location: Roseville, Michigan (just north of Detroit)
- Contact:
Re: 302/347 Trick Flow "R" manifold performance ?
I'll try this one more time ...
http://www.rmcompetition.com
Specialty engine building at its finest.
Specialty engine building at its finest.