***Post Pics of what you are working on**
Moderator: Team
***Post Pics of what you are working on**
Lets all see what you guys are working on. PLEASE REFRAIN FROM GIRLFRIEND, WIFE, SISTER PICS, haha. Lets make SPEED TALK great again. No need to explain in full detail if you don't wish to.
Re: ***Post Pics of what you are working on**
hogging on some heads
You do not have the required permissions to view the files attached to this post.
Re: ***Post Pics of what you are working on**
Mild cleanup Dart 200 pre platinum ported to 248cc.
You do not have the required permissions to view the files attached to this post.
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST
631-816-4911
9:00am - 9:00pm EST
Re: ***Post Pics of what you are working on**
Pre swarfe,883 to 1200 Sportster +.125" inlet +.140" exhaust.
You do not have the required permissions to view the files attached to this post.
Re: ***Post Pics of what you are working on**
You do not have the required permissions to view the files attached to this post.
-
- HotPass
- Posts: 3468
- Joined: Sat Feb 23, 2013 5:42 pm
- Location:
Re: ***Post Pics of what you are working on**
Checking clearances on the valvetrain of a Yamaha SR/TT 500 engine.
-Bob
Re: ***Post Pics of what you are working on**
Assembling a 496 inch Tunnel Port FE.
......and checking out how I'm going to do a cam swap on the dyno with my new 2-piece timing cover for a 351 Cleveland.
......and checking out how I'm going to do a cam swap on the dyno with my new 2-piece timing cover for a 351 Cleveland.
Lykins Motorsports
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
- Rick Finsta
- Pro
- Posts: 370
- Joined: Sat Sep 13, 2014 10:22 am
- Location:
Re: ***Post Pics of what you are working on**
First cuts on my first Bridgeport in my home shop! Getting ready to dry deck some cylinder heads after I mill some more of the welds flat...
Mike Gallo, President
Protohawk - Design/Prototyping, Small Project Support, and Contract Manufacturing
CCA Racing Products - Torque Plates and Engine Rebuild Tooling
Protohawk - Design/Prototyping, Small Project Support, and Contract Manufacturing
CCA Racing Products - Torque Plates and Engine Rebuild Tooling
-
- Guru
- Posts: 1129
- Joined: Mon Mar 24, 2014 1:08 am
- Location:
Re: ***Post Pics of what you are working on**
I'm working on yet another SBC.
You do not have the required permissions to view the files attached to this post.
-
- Guru
- Posts: 1129
- Joined: Mon Mar 24, 2014 1:08 am
- Location:
Re: ***Post Pics of what you are working on**
Also resurfacing a badly eroded 1947 Pontiac straight 8 manifold on my 1950's Lempco surfacing machine.
You do not have the required permissions to view the files attached to this post.
Re: ***Post Pics of what you are working on**
You do not have the required permissions to view the files attached to this post.
Re: ***Post Pics of what you are working on**
357 SBC nitrous streetish engine if I ever finish it.
I think I need a better camera.
I think I need a better camera.
You do not have the required permissions to view the files attached to this post.
Please Note!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
Re: ***Post Pics of what you are working on**
Giving this old girl some love. Sat neglected in a tool and die shop for years before the owner decided he wanted it out of his sight. She needed attention, but has great potential.
You do not have the required permissions to view the files attached to this post.
-
- Guru
- Posts: 4607
- Joined: Sun Sep 18, 2011 11:31 am
- Location: Heading for a bang up with Andromeda as we all are.
Re: ***Post Pics of what you are working on**
Sorry, but I am taking a day off from auto things and rebuilding two1958 HealthKit Mono block auido power amps .
You do not have the required permissions to view the files attached to this post.
You can cut a man's tongue from his mouth, but that does not mean he’s a liar, it just shows that you fear the truth he might speak about you!