Wanted Dodge 2bbl intakes

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
ProPower engines
Guru
Guru
Posts: 8686
Joined: Sun Jan 21, 2007 1:16 pm
Location: Victoria BC Canada

Wanted Dodge 2bbl intakes

Post by ProPower engines »

Hey guys
I am looking for some 2bbl intakes for a 318/360 suitable for a race engine that is restricted to a cast iron unported intake. Depending on the design I am looking at all options available.
Email me through the board and I will get back to you asap.

Thanks for looking
Real Race Cars Don't Have Doors
PackardV8
Guru
Guru
Posts: 7619
Joined: Sun Jul 30, 2006 2:03 pm
Location: Spokane, WA

Re: Wanted Dodge 2bbl intakes

Post by PackardV8 »

We've scrapped out several without any analysis of which might be best. When those who know tell us which years to look for, in a month or two the snow might melt enough to begin looking for one.

jack vines
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering
ProPower engines
Guru
Guru
Posts: 8686
Joined: Sun Jan 21, 2007 1:16 pm
Location: Victoria BC Canada

Re: Wanted Dodge 2bbl intakes

Post by ProPower engines »

The best may be from the early 70's to about 78-79 era.
the intake I am really looking for is from a cop car in the mid 70's to mid 80's from the 360 engine.
This had a single barrel carb which was more like a single butterfly of flap but in a 2 bbl carb body design with a different base plate configuration but the carb and intake worked much much better then the largest 2bbl that was available.

The manifold had a open design on the carb mounting flange area which leads me to think they were specific to either marine or cop cars as there was a single barrel carb deal on chrysler marine engines as well.

Keep me posted when the snow melts. [-o<
Real Race Cars Don't Have Doors
PackardV8
Guru
Guru
Posts: 7619
Joined: Sun Jul 30, 2006 2:03 pm
Location: Spokane, WA

Re: Wanted Dodge 2bbl intakes

Post by PackardV8 »

Wow, that's one I don't believe we've ever seen. Shouldn't be difficult to spot.

jack vines
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering
ProPower engines
Guru
Guru
Posts: 8686
Joined: Sun Jan 21, 2007 1:16 pm
Location: Victoria BC Canada

Re: Wanted Dodge 2bbl intakes

Post by ProPower engines »

They are still out there but not nearly as common as 40 years ago.
We had lots of the old cop cars come through the wrecking yard here over the years and the carbs were real popular for some reason I guess they were N L A from the dealer or rebuilders but the guys that had boats bought them up as OMC discontinued them. #-o
Real Race Cars Don't Have Doors
408swinger
HotPass
HotPass
Posts: 104
Joined: Mon Dec 11, 2017 2:16 pm
Location: Boise

Re: Wanted Dodge 2bbl intakes

Post by 408swinger »

Try forabodiesonly.com

I would be amazed if you dont get a bunch of responses.
ProPower engines
Guru
Guru
Posts: 8686
Joined: Sun Jan 21, 2007 1:16 pm
Location: Victoria BC Canada

Re: Wanted Dodge 2bbl intakes

Post by ProPower engines »

Thanks for the tip.
I forgot about that forum. =D>
Real Race Cars Don't Have Doors
User avatar
Mummert
Expert
Expert
Posts: 692
Joined: Mon Aug 06, 2007 4:24 am
Location: El Cajon CA

Re: Wanted Dodge 2bbl intakes

Post by Mummert »

I don't know if it is what you're talking about, but I remember seeing a single plane design 2 barrel cast iron oem manifold for the small dodge. I thought it was early 60's passenger car but maybe not. Anyone else familiar with this.
Mummert Machine and Development 4 stroke hp
Mummert Y-blocks
ProPower engines
Guru
Guru
Posts: 8686
Joined: Sun Jan 21, 2007 1:16 pm
Location: Victoria BC Canada

Re: Wanted Dodge 2bbl intakes

Post by ProPower engines »

Mummert wrote: Wed Mar 20, 2019 4:31 am I don't know if it is what you're talking about, but I remember seeing a single plane design 2 barrel cast iron oem manifold for the small dodge. I thought it was early 60's passenger car but maybe not. Anyone else familiar with this.
There was a marine intake that was similar to the automotive intake. Either should work just fine so if ya see an intake please let me know.

Thanks again

Dave
Real Race Cars Don't Have Doors
Krooser
Guru
Guru
Posts: 1857
Joined: Wed Jul 31, 2013 10:14 pm
Location: Tropical Wisconsin

Re: Wanted Dodge 2bbl intakes

Post by Krooser »

Seems like the mid-70's Dodge trucks had a higher rise type manifold.
Honored to be a member of the Luxemburg Speedway Hall of Fame Class of 2019
APMachine
New Member
New Member
Posts: 9
Joined: Fri Feb 19, 2016 8:41 pm
Location:

Re: Wanted Dodge 2bbl intakes

Post by APMachine »

Do you have a casting number?
Krooser
Guru
Guru
Posts: 1857
Joined: Wed Jul 31, 2013 10:14 pm
Location: Tropical Wisconsin

Re: Wanted Dodge 2bbl intakes

Post by Krooser »

I found one 2bbl intake you can have....send me a pm.
Honored to be a member of the Luxemburg Speedway Hall of Fame Class of 2019
prairiehotrodder
Guru
Guru
Posts: 1602
Joined: Sat Dec 24, 2011 10:02 am
Location: melfort saskatchewan Canada

Re: Wanted Dodge 2bbl intakes

Post by prairiehotrodder »

I have 2 from 360's around 1975 - 1979.
The Word of God is quick and powerfull
www.therocketshop.blogspot.com
1972ho
Guru
Guru
Posts: 1299
Joined: Thu Nov 21, 2013 12:52 am
Location:

Re: Wanted Dodge 2bbl intakes

Post by 1972ho »

ProPower engines
Guru
Guru
Posts: 8686
Joined: Sun Jan 21, 2007 1:16 pm
Location: Victoria BC Canada

Re: Wanted Dodge 2bbl intakes

Post by ProPower engines »

1972ho wrote: Mon Aug 26, 2019 7:40 pm https://sandiego.craigslist.org/esd/pts ... 29840.html Would it be one like this.
Thanks for the tip but I see its the small intake.
the seller also is a little mis-informed as to what it fits. he says BBM and SBM and said maybe even a hemi :lol: :lol:

Thanks for looking out :D
Real Race Cars Don't Have Doors
Post Reply