WTB looking for reduction gear for B&D refacer

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
scotts439
Member
Member
Posts: 195
Joined: Wed Feb 16, 2011 10:50 am
Location: mass

WTB looking for reduction gear for B&D refacer

Post by scotts439 »

I have a black and decker model A valve grinder (gold) machine, (the later machines) The reduction gear in the chuck drive motor is stripped out. It is a delrin gear that strips when the chuck motor is turned on with diamond dresser installed. (lousy design!) , if anyone has one or is familiar, please let me know. TIA
Keith Morganstein
Guru
Guru
Posts: 5566
Joined: Sun Feb 19, 2006 10:19 am
Location: MA

Re: WTB looking for reduction gear for B&D refacer

Post by Keith Morganstein »

scotts439 wrote: Mon Apr 15, 2019 8:46 pm I have a black and decker model A valve grinder (gold) machine, (the later machines) The reduction gear in the chuck drive motor is stripped out. It is a delrin gear that strips when the chuck motor is turned on with diamond dresser installed. (lousy design!) , if anyone has one or is familiar, please let me know. TIA
I don’t know where to find one, but Al Meekins will make you a gear.

https://gearsmade.com
Automotive Machining, cylinder head rebuilding, engine building. Can't seem to quit #-o
Jginger
Member
Member
Posts: 68
Joined: Fri Sep 03, 2004 6:54 pm
Location:

Re: WTB looking for reduction gear for B&D refacer

Post by Jginger »

are u talking about the nylon small gear? I had a few made. believe I may still have one left.
send me a pic of what u need an I will ck.
Jginger1942@aol.com
scotts439
Member
Member
Posts: 195
Joined: Wed Feb 16, 2011 10:50 am
Location: mass

Re: WTB looking for reduction gear for B&D refacer

Post by scotts439 »

gear.JPG
gear.JPG
You do not have the required permissions to view the files attached to this post.
Post Reply