WTB looking for reduction gear for B&D refacer
Moderator: Team
WTB looking for reduction gear for B&D refacer
I have a black and decker model A valve grinder (gold) machine, (the later machines) The reduction gear in the chuck drive motor is stripped out. It is a delrin gear that strips when the chuck motor is turned on with diamond dresser installed. (lousy design!) , if anyone has one or is familiar, please let me know. TIA
-
- Guru
- Posts: 5566
- Joined: Sun Feb 19, 2006 10:19 am
- Location: MA
Re: WTB looking for reduction gear for B&D refacer
I don’t know where to find one, but Al Meekins will make you a gear.scotts439 wrote: ↑Mon Apr 15, 2019 8:46 pm I have a black and decker model A valve grinder (gold) machine, (the later machines) The reduction gear in the chuck drive motor is stripped out. It is a delrin gear that strips when the chuck motor is turned on with diamond dresser installed. (lousy design!) , if anyone has one or is familiar, please let me know. TIA
https://gearsmade.com
Automotive Machining, cylinder head rebuilding, engine building. Can't seem to quit
Re: WTB looking for reduction gear for B&D refacer
are u talking about the nylon small gear? I had a few made. believe I may still have one left.
send me a pic of what u need an I will ck.
Jginger1942@aol.com
send me a pic of what u need an I will ck.
Jginger1942@aol.com
Re: WTB looking for reduction gear for B&D refacer
You do not have the required permissions to view the files attached to this post.