Shop Equipment for SALE

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
old55er
New Member
New Member
Posts: 1
Joined: Wed Jun 05, 2019 10:33 pm
Location:

Shop Equipment for SALE

Post by old55er »

1. 2 piece Sunnen Heat Bake and Shot Blaster system inc. mounting fixtures,basket,valve cleaning rack.Fits up to 38" head and BB Chevy blocks.In very good condition. $14,500.00
2. Rottler 2B2VB Boring Bar,fully tooled with 1 1/2 " bar,production head and boat motor plates.In very good condition. $14,000.00
3. KI Hone Cabinet w/ friction feed head and Sunnen CH-40 Line hone attachment,drive coupler,block holding jig,3 mandrels,hone stones.In good condition. $12,000.00
4. BHJ Lifter Tru for SB Chevy and SB Chrysler,inc. reams and hones. $2200.00
5. Crank Polisher with stand. $1800.00
6. BHJ Piston Vise. $1300.00
7. Sioux Electric Seat Grinder ( Like New ) . $1200.00
8. Custom made Gas Porting Fixture. $1200.00
9. Custom made Piston Fly Cutting Vise. $1000.00
10. Rod Boring Fixture for car rod pin ends. $800.00
11. Van Norman Fly Wheel Attachment for a 570 Head Broach. $700.00
12. Rocker Arm Attachment for Sioux 645L valve grinder. $200.00
13. 400 Chevy SB,bored,decked and line honed. $350.00
14. Two 350 Chevy SB,bored,decked and line honed. $350.00
15. BHJ/Goodson Deck Plates for honing blocks. A. Aluminum Ford FO-4.6 V8 , B. Steel Pontiac HGM 20, 4 cyl., U vin., C. Steel BB Chevy , D. Steel 400 SB Chevy , E. Two steel 350 SB Chevy. All are in very good condition. $150.00 Each .
16. SBC Connecting Rods,reconditioned with ARP bolts. $75.00 per set. All equipment has been well taken care of and in good or better condition. You can call most anytime as i am retired. My # is 320-630-4327. Thanks for looking, Arnie
You do not have the required permissions to view the files attached to this post.
willie viels
New Member
New Member
Posts: 21
Joined: Sat Jan 08, 2011 1:49 pm
Location:

Re: Shop Equipment for SALE

Post by willie viels »

do you have any pictures of your crankshaft polishing stand. thanks willie viels you can sent it to viels@sbcglobal.net. thanks
Post Reply