On the dyno today at TOCA PERFORMANCE..........sbf 440 cube , 11.0 comp 826 hp @7300rpm valve train stable to 8000 rpm. HYDRAULIC ROLLER.
440 SBF 826HP Hydraulic roller build!!
Moderator: Team
Re: 440 SBF 826HP Hydraulic roller build!!
Steve he used Yates c3s and Edelbrock intake, Factory cam journal/base circle 0.750” wheel........that's all i know. Hard to get info from engine builders...lol
- mt-engines
- Expert
- Posts: 871
- Joined: Fri Sep 27, 2019 12:35 pm
- Location: MN
Re: 440 SBF 826HP Hydraulic roller build!!
How much fuel did it use and what were the brake specifics?
Re: 440 SBF 826HP Hydraulic roller build!!
Very nice setup. Those c3 heads impress me the more i see them. Hard to beat those numbers.
Re: 440 SBF 826HP Hydraulic roller build!!
Very nice setup. Those c3 heads impress me the more i see them. Hard to beat those numbers.
[/quote][/quote]
At 1.87 per cube on pump gas, hydraulic roller.........street engine pretty darn impressive i think.
I wonder how much a 55mm cam .903 lifter, would increase power.
Re: 440 SBF 826HP Hydraulic roller build!!
This is a very impressive build, I'd love to hear more details.
67 camaro
girly rollers on pumpgas:
420 - 641hp BretBauerCam, 1.39, 9.79 @ 137.5
383 - 490hp 224/224, 1.56, 10.77 @ 124.6
502 - 626hp 252/263, 049s 1.44, 10.08 @ 132.7
62 Nova cruiser
383/200-4R/12-bolt w 373s
224/224 HR cam
1.57 10.97 @ 121.2
girly rollers on pumpgas:
420 - 641hp BretBauerCam, 1.39, 9.79 @ 137.5
383 - 490hp 224/224, 1.56, 10.77 @ 124.6
502 - 626hp 252/263, 049s 1.44, 10.08 @ 132.7
62 Nova cruiser
383/200-4R/12-bolt w 373s
224/224 HR cam
1.57 10.97 @ 121.2