Where is the VIN at on the complete drivetrain cradle for a 2004 Buick La Sabre car.
I suppose GM would have stamped it on both the engine as well as the transaxle..
Right, but where?
I know my '67 Camaro had it on the little pad on the block as well as at several other places on my car.
pdq67
Don't know where to put this?
Moderator: Team
Re: Don't know where to put this?
Engine:
Primary location is near the oil pan rail, next to the starter.
Secondary location is below the water pump, near the A/C compressor.
Transmission:
Goodwrench Tag Location: Metal tag riveted to the transmission case, near the RH output shaft housing.
VIN derivative stamping location: Near the oil pan rail, below the metal tag mentioned above.
Secondary VIN location: Near the bellhousing area, LH side, near the engine to transmission mounting bolts.
Primary location is near the oil pan rail, next to the starter.
Secondary location is below the water pump, near the A/C compressor.
Transmission:
Goodwrench Tag Location: Metal tag riveted to the transmission case, near the RH output shaft housing.
VIN derivative stamping location: Near the oil pan rail, below the metal tag mentioned above.
Secondary VIN location: Near the bellhousing area, LH side, near the engine to transmission mounting bolts.