Looking for new roller cams for:
360 Chrysler - need something with .370"-.425" Lobe Lift, on a 110-114 LSA
460 BB Ford - need something with .350"-.400" Lobe Lift, on a 112-116 LSA
WTB, Roller cams
Moderator: Team
WTB, Roller cams
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Re: WTB, Roller cams
Hi Mike,
Not exactly what you want but I thought I would mention it.
I have a steel billet for a 430 Ford with a Schnieder 32R (roller) grind on it. It only has .316 lift but could be reground to something modern.
It has old cosmoline on it and a few very small rust pits, the type of which would clean up at .005 or less.
This has been on the shelf for 40 years.(maybe more) Attached are some pics.
Pete Samuelson
Not exactly what you want but I thought I would mention it.
I have a steel billet for a 430 Ford with a Schnieder 32R (roller) grind on it. It only has .316 lift but could be reground to something modern.
It has old cosmoline on it and a few very small rust pits, the type of which would clean up at .005 or less.
This has been on the shelf for 40 years.(maybe more) Attached are some pics.
Pete Samuelson
You do not have the required permissions to view the files attached to this post.
Re: WTB, Roller cams
Is that for a 430 MEL engine? If so, how much do you want for it? Private message if Mike doesn't want it. Joe-71
Joe-71