DART Little M Block

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
Speedster400
Member
Member
Posts: 143
Joined: Mon Jun 12, 2006 8:43 pm
Location: North Central Division

DART Little M Block

Post by Speedster400 »

Can the cam tunnel be machined out for a 55mm Cam?



Edit-Spelling
Last edited by Speedster400 on Fri Feb 15, 2008 8:42 am, edited 1 time in total.
Oshkosh Defense-Powertrain Engineering
Insidecompracing.com
Top
CNC BLOCKS
Guru
Guru
Posts: 4653
Joined: Thu Jul 01, 2004 6:34 am
Location: NORTHEAST
Contact:
Contact CNC BLOCKS

Re: DART Little M Block

Post by CNC BLOCKS »

Speedster400 wrote:Can the cm unnel be machined out for a 55mm base circle?
Yes they can as we just machined a block last week for a 55MM cam core and we blue print bored the cam tunnel to 2.283 and used the GMP55-T babbit cam bearing or they could use a 50MM roller cam bearing in the same bore if needed.
Website is up and running
http://hinksonautomotive-cncblocks.com/
Machine shop tour
http://hinksonautomotive-cncblocks.com/shop-tour/
Monthly Specials
http://hinksonautomotive-cncblocks.com/specials/
55MM babbit cam bearings with 1 hole
Top
compguy
Member
Member
Posts: 110
Joined: Sat Jan 27, 2007 2:33 am
Location: Sitting down, facing West

Re: DART Little M Block

Post by compguy »

Can the cam tunnel on the Little M be machined to 2.479" ?
Top
User avatar
mt-engines
Expert
Expert
Posts: 873
Joined: Fri Sep 27, 2019 12:35 pm
Location: MN

Re: DART Little M Block

Post by mt-engines »

compguy wrote: ↑Fri Nov 20, 2020 1:05 am Can the cam tunnel on the Little M be machined to 2.479" ?
are you wanting to go 55mm roller bearing? or 60mm babbit?

The answer is yes, but I have only done it in the .391" raised cam, and not the .434".
Top
compguy
Member
Member
Posts: 110
Joined: Sat Jan 27, 2007 2:33 am
Location: Sitting down, facing West

Re: DART Little M Block

Post by compguy »

Std cam location Little M. 60mm babbit, same size as 55mm roller.
Top
Post Reply

Return to “Engine Tech”