msd 6 btm

This subforum is used to ask questions about this forum, read howto-tutorials about posting/attaching images and videos. General maintenance alerts and upcoming updates will be also notified here.

Moderator: Team

Post Reply
c2rocket420x
New Member
New Member
Posts: 3
Joined: Wed Dec 22, 2021 8:10 pm
Location: san jose ca

msd 6 btm

Post by c2rocket420x »

Has any body ran the msd 6 btm with out locking the timing out I am running a roots blower with about 12 pounds boost with a pro billet dist and would like to run around 20 degrees initial and 12 or 14 would give me 32 or 34 total all in by 2500 rpm but there's no way unless I run the digital e curve dist. but the main thing here is do I lock it out or not anImage[/img][/img]d I know I need to phase the rotor in, thanks .
66 vitamin shop 2.jpg
66 vitamin shop 2.jpg
66 vitamin shop 2.jpg
You do not have the required permissions to view the files attached to this post.
ChopperScott
HotPass
HotPass
Posts: 594
Joined: Tue Nov 30, 2021 8:47 am
Location: West Milford, NJ
Contact:

Re: msd 6 btm

Post by ChopperScott »

Running the lightest (silver) springs will advance full timing before 2500 rpm.
'73 Camaro Z/28 NETO/N
434 SBC 11:1, 1.294, 6.178 @ 108.87, 9.81 @ 134.93 (3060#, Naturally Aspirated, Sunoco Ultra 94)
Chopper Air Port 917-589-1278
Post Reply