Torque Master 90 Day Trial BBC Question
Moderator: David Vizard
Torque Master 90 Day Trial BBC Question
I've had quite a bit of time to mess around with the TM program using various data points of a SBC project.
Today, I went about a BBC spec and found that the BBC hasn't been coded yet.
Is this a free trial thing or a project still in the works?
Thanks in advance.
Today, I went about a BBC spec and found that the BBC hasn't been coded yet.
Is this a free trial thing or a project still in the works?
Thanks in advance.
You do not have the required permissions to view the files attached to this post.
Kevin
- Stan Weiss
- Vendor
- Posts: 4823
- Joined: Tue Feb 20, 2007 1:31 pm
- Location: Philadelphia, PA
- Contact:
Re: Torque Master 90 Day Trial BBC Question
From July 2020.
Stan
I have since Pulled the Pontiac stuff out of TMC and have stopped any work on the BBC stuff. Since before July 2020 David has been very busy and I have not been able to get any of his time to look at TMC.Stan Weiss wrote: ↑Thu Jul 09, 2020 11:00 am I know some of you coming in here and reading this thread are saying they added Pontiac? The answer is yes we added Pontiac because I like Pontiac. I want to thank Mike / Pastry_Chef for all of his help during the development of the Pontiac version. I am, although very slowly working on a BBC SRT version. I have no idea of any time frame when it will even be ready for someone to "BETA" test.
Stan
tmc_bbc.gif
Stan
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
Re: Torque Master 90 Day Trial BBC Question
Thanks for that Stan.
Well, at least the SBC stuff is functional and that's my primary area of interest.
Hopefully, it'll all come around eventually.
Thanks again.
Well, at least the SBC stuff is functional and that's my primary area of interest.
Hopefully, it'll all come around eventually.
Thanks again.
Kevin
-
- Guru
- Posts: 1787
- Joined: Thu Jan 15, 2015 12:19 pm
- Location:
Re: Torque Master 90 Day Trial BBC Question
Skinny,
I have been working on the BBC program for a while now but I have run into a bit of a snag. The BBC program needs a re-write of some of the SBC polynomials that work in conjustion with each other concerning multiple corrections as stroke lenght increases.This is far from as simple as it at first looks because chamber shape for any given CR ratio changes and that in turn has a effect on combustion efficiency. I have now found that my brain hemorage and subsequent emergency brain operations have deprived me of some of my math skills. bottom line is I will have to find a different method to compute the factors concerned. At present i have no ideas as to how I might do this. But I refuse to be beaten!!!
David Vizard Small Group Performance Seminars - held about every 2 months. My shop or yours. Contact for seminar deails - davidvizardseminar@gmail.com for details.
- Stan Weiss
- Vendor
- Posts: 4823
- Joined: Tue Feb 20, 2007 1:31 pm
- Location: Philadelphia, PA
- Contact:
Re: Torque Master 90 Day Trial BBC Question
I have gotten from David provisional information for a BBC HRT version. And that has now moved into preliminary testing mode.
Stan
Stan
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
Re: Torque Master 90 Day Trial BBC Question
Stan Weiss wrote:
> I have gotten from David provisional information...
> Stan
Is that recently Stan? David hasn't posted on S-T for two months and I was hoping his absence was due to workload rather than health issues.
> I have gotten from David provisional information...
> Stan
Is that recently Stan? David hasn't posted on S-T for two months and I was hoping his absence was due to workload rather than health issues.
Felix, qui potuit rerum cognscere causas.
Happy is he who can discover the cause of things.
Happy is he who can discover the cause of things.
- Stan Weiss
- Vendor
- Posts: 4823
- Joined: Tue Feb 20, 2007 1:31 pm
- Location: Philadelphia, PA
- Contact:
Re: Torque Master 90 Day Trial BBC Question
Bill,
This was during this past week. Yes he very busy.
Stan
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
Re: Torque Master 90 Day Trial BBC Question
Thanks Stan.
Felix, qui potuit rerum cognscere causas.
Happy is he who can discover the cause of things.
Happy is he who can discover the cause of things.
Re: Torque Master 90 Day Trial BBC Question
MadBill wrote:
> Stan Weiss wrote:
> > I have gotten from David provisional information...
> > Stan
>
> Is that recently Stan? David hasn't posted on S-T for two months and I was hoping his
> absence was due to workload rather than health issues.
he's been doing youtube videos over last few weeks.
> Stan Weiss wrote:
> > I have gotten from David provisional information...
> > Stan
>
> Is that recently Stan? David hasn't posted on S-T for two months and I was hoping his
> absence was due to workload rather than health issues.
he's been doing youtube videos over last few weeks.
Re: Torque Master 90 Day Trial BBC Question
Thanks Digger; I'll check them out.
Felix, qui potuit rerum cognscere causas.
Happy is he who can discover the cause of things.
Happy is he who can discover the cause of things.
- Stan Weiss
- Vendor
- Posts: 4823
- Joined: Tue Feb 20, 2007 1:31 pm
- Location: Philadelphia, PA
- Contact:
Re: Torque Master 90 Day Trial BBC Question
Here is a new 14 Day trail version for anyone interested. It contains what David calls a "Provisional Function" for Big Block Chevy Hydraulic Roller Tappet cams and other engine parts.
Stan
PS File removed as it timed out.
Stan
PS File removed as it timed out.
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
- Stan Weiss
- Vendor
- Posts: 4823
- Joined: Tue Feb 20, 2007 1:31 pm
- Location: Philadelphia, PA
- Contact:
Re: Torque Master 90 Day Trial BBC Question
I have been busy and have not had time to work on this. So I am just going to put it up what I have done and see what you think. Here is a new 30 Day trail version for anyone interested. It contains what I will call an "ALPHA version" for Big Block Chevy Solid Roller Tappet cams and other engine parts.
Stan
File does not work it will come up and say it is out dated.
Stan
File does not work it will come up and say it is out dated.
You do not have the required permissions to view the files attached to this post.
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
- Stan Weiss
- Vendor
- Posts: 4823
- Joined: Tue Feb 20, 2007 1:31 pm
- Location: Philadelphia, PA
- Contact:
Re: Torque Master 90 Day Trial BBC Question
Both David and I have been busy and have had almost no time to work on this. But for anyone that maybe interested, the Big Block Chevy Solid Roller Tappet cams and other engine parts is now in "Beta" testing.
Stan
Stan
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
- Stan Weiss
- Vendor
- Posts: 4823
- Joined: Tue Feb 20, 2007 1:31 pm
- Location: Philadelphia, PA
- Contact:
Re: Torque Master 90 Day Trial BBC Question
Here is a new 14 Day trail version for anyone interested. It contains Big Block Chevy Solid Roller Tappet cams and other engine parts. This is a first release so please let know if you have any problems.
Thanks,
Stan
Thanks,
Stan
You do not have the required permissions to view the files attached to this post.
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV