A few years ago I began boring the holes and these have been gathering dust.
Someone should put them back in service.
$200.00 plus ups
Urbana, Il
217-531-1770 9-5 CST
credit cards accepted
1 - 15/32 drill
1 - 1/2" reamer
1 - 19/32 drill
1- 5/8" reamer
1 - 23/32 drill
1 - 3/4" reamer
1 - 27/32 drill undercut
1 - 7/8" reamer undercut
2 - 31/32 drill
1 - 31/32 drill undercut
1 - 1" reamer undercut
Heavy metal drills and reamers -SOLD
Moderator: Team
- Dave Koehler
- Vendor
- Posts: 7207
- Joined: Mon Oct 04, 2004 11:19 pm
- Location: Urbana, IL USA
- Contact:
Heavy metal drills and reamers -SOLD
You do not have the required permissions to view the files attached to this post.
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
- Dave Koehler
- Vendor
- Posts: 7207
- Joined: Mon Oct 04, 2004 11:19 pm
- Location: Urbana, IL USA
- Contact:
Re: Heavy metal drills and reamers -SOLD
Sold, Thanks EC1
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Re: Heavy metal drills and reamers -SOLD
That was a smokin' deal. I'm a tool junkie like most of us and I looked at your ad a couple times, I didn't want them sittin in a drawer never used either. Hopefully went to a good home
Heat is energy, energy is horsepower...but you gotta control the heat.
-Carl
-Carl