David Vizard & Terry Walters Sad Issues

Post photos/videos of anything* you own - Or, ask to see something.

Moderator: Team

Post Reply
USMC_Spike
Pro
Pro
Posts: 264
Joined: Tue Mar 06, 2012 12:53 pm
Location: MotorKraft Mit Uns - East of the Pecos, Tejas

David Vizard & Terry Walters Sad Issues

Post by USMC_Spike »

Hi,

It is with great disappointment I've head trying to solve issues with both these men.
I've purchased a engine built by Terry Walters to David Vizard's specifications.

I've only had issues paying for things and not receiving them.
I've contacted both these people and got the brush off from them
over and over again.

Engine was supposed to also be street able, with Hei distributor
with vacuum advance and AED carb specified for this engine.

But Walters did the bait and switch on me. MSD Distributor
along with a Holley 950 Ultra HP that hasn't run right and has
no provision for Manifold vacuum. And I don't know why
I got this Holley, there is nothing special about it, factory stock
and it didn't have the screwdriver nor the Jet Extension etc etc.

Hey, Vizard says vacuum advance from manifold vacuum helps
the engine idle and perform better, in all his books etc, no provisions
for a stock out of the box Holley they forced upon me.

Don't take my word for it, I found this post from Terry Walter's confirming
he received the money for my AED carb. He wouldn't send me the carb
though. Cheating SOB.
AEDCarbConfirmation.jpg
You do not have the required permissions to view the files attached to this post.
Image
FOUND: new improved smaller non-ricer pic
USMC_Spike
Pro
Pro
Posts: 264
Joined: Tue Mar 06, 2012 12:53 pm
Location: MotorKraft Mit Uns - East of the Pecos, Tejas

Re: David Vizard & Terry Walters Sad Issues

Post by USMC_Spike »

Still trying.
Image
FOUND: new improved smaller non-ricer pic
David Vizard
Guru
Guru
Posts: 1787
Joined: Thu Jan 15, 2015 12:19 pm
Location:

Re: David Vizard & Terry Walters Sad Issues

Post by David Vizard »

USMC_Spike wrote: Mon Feb 20, 2023 7:07 pm Hi,

It is with great disappointment I've head trying to solve issues with both these men.
I've purchased a engine built by Terry Walters to David Vizard's specifications.

I've only had issues paying for things and not receiving them.
I've contacted both these people and got the brush off from them
over and over again.

Engine was supposed to also be street able, with Hei distributor
with vacuum advance and AED carb specified for this engine.

But Walters did the bait and switch on me. MSD Distributor
along with a Holley 950 Ultra HP that hasn't run right and has
no provision for Manifold vacuum. And I don't know why
I got this Holley, there is nothing special about it, factory stock
and it didn't have the screwdriver nor the Jet Extension etc etc.

Hey, Vizard says vacuum advance from manifold vacuum helps
the engine idle and perform better, in all his books etc, no provisions
for a stock out of the box Holley they forced upon me.

Don't take my word for it, I found this post from Terry Walter's confirming
he received the money for my AED carb. He wouldn't send me the carb
though. Cheating SOB.

AEDCarbConfirmation.jpg
Spike, Got to fix this. I think the blank times I get from my brain surgery are probably to blame. PM me with a tel # and I will see what can be done to get you happy again.
DV
David Vizard Small Group Performance Seminars - held about every 2 months. My shop or yours. Contact for seminar deails - davidvizardseminar@gmail.com for details.
USMC_Spike
Pro
Pro
Posts: 264
Joined: Tue Mar 06, 2012 12:53 pm
Location: MotorKraft Mit Uns - East of the Pecos, Tejas

Re: David Vizard & Terry Walters Sad Issues

Post by USMC_Spike »

David,

PM sent with the information you requested.

Spike
Image
FOUND: new improved smaller non-ricer pic
Chris_Hamilton
Pro
Pro
Posts: 316
Joined: Sun May 24, 2015 11:50 pm
Location:

Re: David Vizard & Terry Walters Sad Issues

Post by Chris_Hamilton »

Hope it works out for you Spike. Terry Walters and Vizard should at the least give you the carb you paid for not some cast off like they did. Mr Vizard I would hope you would exercise your influence with Mr. Walters and make this guy whole.
High quality metal, body and paint work
http://www.spiuserforum.com/index.php?t ... inia.9030/
USMC_Spike
Pro
Pro
Posts: 264
Joined: Tue Mar 06, 2012 12:53 pm
Location: MotorKraft Mit Uns - East of the Pecos, Tejas

Re: David Vizard & Terry Walters Sad Issues

Post by USMC_Spike »

Thanks Chris, it is a wait and see.
Image
FOUND: new improved smaller non-ricer pic
USMC_Spike
Pro
Pro
Posts: 264
Joined: Tue Mar 06, 2012 12:53 pm
Location: MotorKraft Mit Uns - East of the Pecos, Tejas

Re: David Vizard & Terry Walters Sad Issues

Post by USMC_Spike »

UPDATE

At the moment, DV and I are exchanging, emails etc.
We have scheduled a conference call.

So there is hope we can solve the issues.

--thx Spike
Image
FOUND: new improved smaller non-ricer pic
USMC_Spike
Pro
Pro
Posts: 264
Joined: Tue Mar 06, 2012 12:53 pm
Location: MotorKraft Mit Uns - East of the Pecos, Tejas

Re: David Vizard & Terry Walters Sad Issues

Post by USMC_Spike »

update

DV and I chatted, he wanted TW to be left out of it for some reason.
I'm sending back my Holley 950 Ultra XP carb. DV thought he had enough
in his parts bin to put together a carb. So it won't be an AED.

Wondering how much performance do you get from a vacuum secondary Holley?
The man thing I needed was a vacuum port for the base plate for manifold vacuum
to the vacuum advance on distributor. I can't drill a port into the intake manifold
with out sending metal flakes into the engine.

He was going to find an HEI unit and set it up properly for the engine combo.
Then send these to me after I send him what I have.

David also asked that the other guy who had issues, to contact
him so he can make it right as well.

Cheers, Spike
Image
FOUND: new improved smaller non-ricer pic
User avatar
Dave Koehler
Vendor
Posts: 7197
Joined: Mon Oct 04, 2004 11:19 pm
Location: Urbana, IL USA
Contact:

Re: David Vizard & Terry Walters Sad Issues

Post by Dave Koehler »

USMC_Spike wrote: Fri Apr 07, 2023 4:38 pm update

DV and I chatted, he wanted TW to be left out of it for some reason.
I'm sending back my Holley 950 Ultra XP carb. DV thought he had enough
in his parts bin to put together a carb. So it won't be an AED.

Wondering how much performance do you get from a vacuum secondary Holley?
The man thing I needed was a vacuum port for the base plate for manifold vacuum
to the vacuum advance on distributor. I can't drill a port into the intake manifold
with out sending metal flakes into the engine.

He was going to find an HEI unit and set it up properly for the engine combo.
Then send these to me after I send him what I have.

David also asked that the other guy who had issues, to contact
him so he can make it right as well.

Cheers, Spike
What is stopping you from pulling the manifold for the mod?
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
USMC_Spike
Pro
Pro
Posts: 264
Joined: Tue Mar 06, 2012 12:53 pm
Location: MotorKraft Mit Uns - East of the Pecos, Tejas

Re: David Vizard & Terry Walters Sad Issues

Post by USMC_Spike »

That mod was never in the plan.
It was a bait and switch from Terry Walters.
Terry should have paid to have the engine sent
back to him and he could have done that himself
and fixed the oil leaks from the engine.
I had specific things I needed at the time
which didn't happen.

I can't do the work any longer and can't afford
to have the car towed to someone else who would
screw it up more than it is.

The fuel bowls of the Holley 950 Ultra XP
where the fuel inlet needle and seat are,
have two difference diameters.The primary
was fine, the secondary was tight/smaller where
the needle was stuck.

If you would like to volunteer Dave,
drive your repair truck here and let's
see what we can do.

We can't test anything until I get the replacement
carb and Dizzy from David Vizard.

Cheers
Image
FOUND: new improved smaller non-ricer pic
User avatar
FC-Pilot
HotPass
HotPass
Posts: 913
Joined: Tue Mar 17, 2009 2:23 pm
Location: Springtown, TX
Contact:

Re: David Vizard & Terry Walters Sad Issues

Post by FC-Pilot »

USMC_Spike wrote: Thu May 04, 2023 3:05 am
If you would like to volunteer Dave,
drive your repair truck here and let's
see what we can do.


Cheers
Where do you live? If it’s close to me I will come help.

Paul
"It's a fine line between clever and stupid." David St. Hubbins
USMC_Spike
Pro
Pro
Posts: 264
Joined: Tue Mar 06, 2012 12:53 pm
Location: MotorKraft Mit Uns - East of the Pecos, Tejas

Re: David Vizard & Terry Walters Sad Issues

Post by USMC_Spike »

I"m in North Texas
Image
FOUND: new improved smaller non-ricer pic
FuelieNova
HotPass
HotPass
Posts: 253
Joined: Sat Jul 10, 2010 3:48 pm
Location:

Re: David Vizard & Terry Walters Sad Issues

Post by FuelieNova »

Any updates?
Tom
Post Reply