NEW 444ci ALL ALUMINUM SB2.2 - 854hp

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
perfconn
Pro
Pro
Posts: 343
Joined: Wed Nov 04, 2009 9:07 am
Location:

NEW 444ci ALL ALUMINUM SB2.2 - 854hp

Post by perfconn »

444ci ALL ALUMINUM SB2.2
PBM aluminum block w/50mm roller cam bearings
Callies Magnum 4.125 stroke crank - 50#
Callies 6" Ultra 2" I-beam rods - 633 grams
JE 4.135 bore flattop pistons w/.043-.043-3mm rings
Hendricks DH8C SB2.2 heads - 33.4cc chambers
2.180 - 1.600 - 5/16 titanium valves
JHE 10C valve springs
Exeldyne tool steel retainers
Jesel 1.70 - 1.75 shaft rockers
Comp Cam 50mm 8620 billet cam
Morel .904 lifters
GM 699 intake
Cast aluminum valve covers w/oilers
MSD distributor
MSD crank trigger
Scott sparkplug wires
Dan Olson aluminum drysump oilpan
Bosch sparkplugs
ATI balancer
Edelbrock waterpump
Winning Edge 1000cfm gas carburetor
14.24 compression
All brand new parts including heads
Valves - .012 hot
Timing - 29*
854hp @ 7000rpm
697 # torque @ 5800 rpm
$27,500 cash
Pictures & dyno sheets are available by email
Email : terry.marciaburnett@gmail.com
Phone : 865-567-6943
perfconn
Pro
Pro
Posts: 343
Joined: Wed Nov 04, 2009 9:07 am
Location:

Re: NEW 444ci ALL ALUMINUM SB2.2 - 854hp

Post by perfconn »

Pictures of parts
You do not have the required permissions to view the files attached to this post.
perfconn
Pro
Pro
Posts: 343
Joined: Wed Nov 04, 2009 9:07 am
Location:

Re: NEW 444ci ALL ALUMINUM SB2.2 - 854hp

Post by perfconn »

Couple more pictures after we got it off dyno.
You do not have the required permissions to view the files attached to this post.
Bigchief632
Pro
Pro
Posts: 449
Joined: Tue Aug 09, 2022 9:20 am
Location: US

Re: NEW 444ci ALL ALUMINUM SB2.2 - 854hp

Post by Bigchief632 »

Is this the one from the Quench thread? Seemed to have worked pretty well.
Maximum power using simple logic and common sense
perfconn
Pro
Pro
Posts: 343
Joined: Wed Nov 04, 2009 9:07 am
Location:

Re: NEW 444ci ALL ALUMINUM SB2.2 - 854hp

Post by perfconn »

Yep,thats it.It liked a little more timing than the last 4" stroke engine but still a pretty good engine.We were having trouble with making a smooth pull because it made so much torque.Thought the problem was brake water tank had too much water in it.Turned out we needed to open the brake water valve a little more to compensate for torque.I think it has more to show if we had not quit.We tried 2 different carburetors,a 950 Stealth & a 1000cfm Winning Edge.Started with 28* timing,then a couple of pulls with 26 degrees timing(rich)& then put 28.5*(lean) in before we quit.All were on Renegade 112 gas.Engine is solid with no leaks,buyer will just need to get the most out of it with his tuning.
perfconn
Pro
Pro
Posts: 343
Joined: Wed Nov 04, 2009 9:07 am
Location:

Re: NEW 444ci ALL ALUMINUM SB2.2 - 854hp

Post by perfconn »

Price is negociable.Depends on whether you need carburetor & which one,or whether you need engine delivered or picked up here & whether you would like it dynoed again with you there.Call me if you are interested,I'm sure we can work something out.
perfconn
Pro
Pro
Posts: 343
Joined: Wed Nov 04, 2009 9:07 am
Location:

Re: NEW 444ci ALL ALUMINUM SB2.2 - 854hp

Post by perfconn »

I also have a video of one of the dyno pulls I can email you if you are interested in engine.
perfconn
Pro
Pro
Posts: 343
Joined: Wed Nov 04, 2009 9:07 am
Location:

Re: NEW 444ci ALL ALUMINUM SB2.2 - 854hp

Post by perfconn »

Price is lowered to $26,500
perfcon
Member
Member
Posts: 76
Joined: Mon Jun 26, 2023 2:13 pm
Location: Tennessee

Re: NEW 444ci ALL ALUMINUM SB2.2 - 854hp

Post by perfcon »

Sold - sold - sold
Post Reply