850-16 Comp Hyd Roller Lifters ticking SHP/SBC
Moderator: Team
-
- New Member
- Posts: 42
- Joined: Thu Jun 27, 2013 7:02 pm
- Location:
Re: 850-16 Comp Hyd Roller Lifters ticking SHP/SBC
Originally set all this up to be a COMP package, At the time of this build, comp had zero cores available and no PO cut to buy cores for at least 6 months, to get a core to grind a new cam !! So I went with Erson who had dozens of cores on the shelf. This is a 1.0 BC Erson grind, lobes RH298/365 RH306/365 110+4 .365 lobe lift. Heads were spec'd by Chad at SRH. Rockers a Comp Pro Magnum 1.6 7/16 studs.
Re: 850-16 Comp Hyd Roller Lifters ticking SHP/SBC
https://www.youtube.com/watch?v=4Q1lMCIRHJg
Has anyone tried this mod for hydraulic lifter noise?
Has anyone tried this mod for hydraulic lifter noise?
Re: 850-16 Comp Hyd Roller Lifters ticking SHP/SBC
1/8 of a turn or a full turn, preload is preload.wheelsup330 wrote: ↑Fri May 19, 2023 6:37 pm Yeah its noisy all the time, but slightly more noticeable when warm. Funny thing is that its not much difference, from the 1/8 turn setting to 1/2 turn. Which surprised me. I thought it would cure the noise.
Ignorance leads to confidence more often than knowledge does.
Nah, I'm not leaving myself out of the ignorant brigade....at times.
Nah, I'm not leaving myself out of the ignorant brigade....at times.
Re: 850-16 Comp Hyd Roller Lifters ticking SHP/SBC
Wheelsup330 , are you running a mechanical fuel pump ? If yes it could be the fuel pumps arm spring is broken / weak or the arm has clearance to the cam eccentric.
Re: 850-16 Comp Hyd Roller Lifters ticking SHP/SBC
When it comes to quiet operation..........Hydraulic roller lifters “are like a box of chocolates”
One of my favorite examples of how noisy they can get:
https://m.youtube.com/watch?time_contin ... =emb_title
One of my favorite examples of how noisy they can get:
https://m.youtube.com/watch?time_contin ... =emb_title
Somewhat handy with a die grinder.
-
- New Member
- Posts: 42
- Joined: Thu Jun 27, 2013 7:02 pm
- Location:
Re: 850-16 Comp Hyd Roller Lifters ticking SHP/SBC
SCHNIKIES these aren't anywhere near sounding horrible, just ticking enough I'm not comfortable with it going out the door.PRH wrote: ↑Sat May 27, 2023 6:07 pm When it comes to quiet operation..........Hydraulic roller lifters “are like a box of chocolates”
One of my favorite examples of how noisy they can get:
https://m.youtube.com/watch?time_contin ... =emb_title
-
- New Member
- Posts: 42
- Joined: Thu Jun 27, 2013 7:02 pm
- Location:
Re: 850-16 Comp Hyd Roller Lifters ticking SHP/SBC
Negative its running on a in-tank pump with a sniper, which I thought it was possible this was some "injector tick" but after listening around with a scope its def from inside the rocker covers.
-
- New Member
- Posts: 42
- Joined: Thu Jun 27, 2013 7:02 pm
- Location:
Re: 850-16 Comp Hyd Roller Lifters ticking SHP/SBC
I have def not seen this until now. Def had not heard of anyone having lifter "lack of pump" issues with these Dart blocks either. Wish I had seen this two years ago.RTR-1 wrote: ↑Sat May 27, 2023 1:39 am https://www.youtube.com/watch?v=4Q1lMCIRHJg
Has anyone tried this mod for hydraulic lifter noise?
Re: 850-16 Comp Hyd Roller Lifters ticking SHP/SBC
O_ringed Distributor body would do that to.wheelsup330 wrote: ↑Sun May 28, 2023 6:10 pmI have def not seen this until now. Def had not heard of anyone having lifter "lack of pump" issues with these Dart blocks either. Wish I had seen this two years ago.RTR-1 wrote: ↑Sat May 27, 2023 1:39 am https://www.youtube.com/watch?v=4Q1lMCIRHJg
Has anyone tried this mod for hydraulic lifter noise?
Ignorance leads to confidence more often than knowledge does.
Nah, I'm not leaving myself out of the ignorant brigade....at times.
Nah, I'm not leaving myself out of the ignorant brigade....at times.
-
- New Member
- Posts: 42
- Joined: Thu Jun 27, 2013 7:02 pm
- Location:
Re: 850-16 Comp Hyd Roller Lifters ticking SHP/SBC
Well I pulled out the Comp 850 lifters, they are noticeably spongy in the plungers and these Howard’s are not at all spongy just new out of the box. Take a look at the oil band location and compared the two oil port locations as well. Comp 850 on the left. Howard’s 91113 on right. These new lifters are set at .035” preload and quiet as OE.
You do not have the required permissions to view the files attached to this post.
-
- New Member
- Posts: 42
- Joined: Thu Jun 27, 2013 7:02 pm
- Location:
Re: 850-16 Comp Hyd Roller Lifters ticking SHP/SBC
As an additional note I had put the COMP lifter bore grooves in these lifter bores and I was beginning to doubt that decision but this proves that block oiling was NOT the issue. Very possible that the 850 Comp lifter oil band is just too wide and drops too low to effectively seal?? But I can guarantee they were not open and not visible from below the lifter bore. I checked with a bore scope once I had the intake off. So that’s my prognosis. Small Base Cam near 1.0? Run Howard’s.
Re: 850-16 Comp Hyd Roller Lifters ticking SHP/SBC
Glad you got it sorted out!!
Somewhat handy with a die grinder.