ARP Head Bolts, Deck Plate, SBC, BBC
Moderator: Team
ARP Head Bolts, Deck Plate, SBC, BBC
Hey all, got a question regarding what to use on the head bolt threads when using a deck plate on an engine where the thread needs to be sealed? This pertains to using ARP bolts. Does one use thread sealer or ARP ultra lube for the honing step? Thanks in advance.
Re: ARP Head Bolts, Deck Plate, SBC, BBC
I use the same stuff the engine will be assembled with. Also make the grip length on the torque plate the same as the heads
Monty Frerichs
B&M Machine
B&M Machine
-
- Guru
- Posts: 1763
- Joined: Wed Aug 26, 2009 8:30 pm
- Location: Beautiful Southern Maryland
- Contact:
Re: ARP Head Bolts, Deck Plate, SBC, BBC
I use the ARP lube. Also like Monty said, make sure the thread engagement is going to be the same as with the cylinder head.
Bill Koustenis
Advanced Automotive Machine
Waldorf Md
www.enginerepairshop.com
Advanced Automotive Machine
Waldorf Md
www.enginerepairshop.com
Re: ARP Head Bolts, Deck Plate, SBC, BBC
Hey thanks, I have the thread engagment down, spacers made to compensate and deck plate counterboed as needed. I wasn't sure what the thread lube sealer protocol for honing was. I believe i will use thead sealer as that is what will be usaed at assembly.