WTB New3aCut Driver Body
Moderator: Team
-
- New Member
- Posts: 5
- Joined: Thu Jan 09, 2020 12:43 pm
- Location: Union Grove, WI
WTB New3aCut Driver Body
Anyone have some of the hex drive cutter bodies like pictured below? I am looking to get 2 or 3 of these and possibly any of the other associated tooling that goes with it if available.
Thanks in advance
James
Thanks in advance
James
You do not have the required permissions to view the files attached to this post.
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: WTB New3aCut Driver Body
Check out Delrio auto on FB
he also sells the stuff under new3acut on ebay as well.
Not sure if he is still making the stuff after the covid thing hit but he had some stuff.
He sold good tooling but the main issue is availability. depending on what VGS machine you have you can get ball drivers from Newan or Cylinder Head Supply for about the same cost now as his stuff was made in India not that its a bad thing but the delay with covid the world wide manufacturing of everything has been greatly reduced by factory shut downs and staff shortages.
he also sells the stuff under new3acut on ebay as well.
Not sure if he is still making the stuff after the covid thing hit but he had some stuff.
He sold good tooling but the main issue is availability. depending on what VGS machine you have you can get ball drivers from Newan or Cylinder Head Supply for about the same cost now as his stuff was made in India not that its a bad thing but the delay with covid the world wide manufacturing of everything has been greatly reduced by factory shut downs and staff shortages.
Real Race Cars Don't Have Doors
-
- New Member
- Posts: 5
- Joined: Thu Jan 09, 2020 12:43 pm
- Location: Union Grove, WI
Re: WTB New3aCut Driver Body
He no longer makes them which is why I was looking to see if anyone had something they were looking to sell. If I can't find some I will just convert over to the Goodson ball drive setup.
Re: WTB New3aCut Driver Body
I have one of those along with some of his pilots and a few other things he has that is all practically brand new but I would want to sell it all
If interested I will get up a list
Mitch
If interested I will get up a list
Mitch
-
- New Member
- Posts: 5
- Joined: Thu Jan 09, 2020 12:43 pm
- Location: Union Grove, WI
Re: WTB New3aCut Driver Body
Let me know what you have exactly and how much you want for all of it. Feel free to email me directly if you would like.
Thanks
James
Thanks
James
Re: WTB New3aCut Driver Body
You do not have the required permissions to view the files attached to this post.
Re: WTB New3aCut Driver Body
18 pilots 4.0mm 4.02mm 4.5mm 5.0mm 5.02mm .216 .217 .218 .235 .236 .237 .273 .274 .275 .276.277 .311 .341
1/2 hex driver, 1 cutter body, (1-1/8) (1 1/8-1 1/4) (1 1/4 1 3/8) valve seat pocket cutters (1inch ) (1 1/8 inch) 45 degree seat cutters 1 set .030 3 angle 5 pack cutters 1 set .040 3 angle 5 pack cutters 1 set of cutters for valve seat pocket cutters 1 setting fixture 1 handle for pilot removal $1500 for all shipped
-
- New Member
- Posts: 5
- Joined: Thu Jan 09, 2020 12:43 pm
- Location: Union Grove, WI
Re: WTB New3aCut Driver Body
Still in the market for at least one driver body if anyone is looking to part ways. Would also consider just switching over to a ball head driver setup like a Goodson etc if someone is selling those.
Thanks!!
Thanks!!
Re: WTB New3aCut Driver Body
these are no longer availablemitch wrote: ↑Wed Mar 02, 2022 7:59 am18 pilots 4.0mm 4.02mm 4.5mm 5.0mm 5.02mm .216 .217 .218 .235 .236 .237 .273 .274 .275 .276.277 .311 .341
1/2 hex driver, 1 cutter body, (1-1/8) (1 1/8-1 1/4) (1 1/4 1 3/8) valve seat pocket cutters (1inch ) (1 1/8 inch) 45 degree seat cutters 1 set .030 3 angle 5 pack cutters 1 set .040 3 angle 5 pack cutters 1 set of cutters for valve seat pocket cutters 1 setting fixture 1 handle for pilot removal $1500 for all shipped
-
- New Member
- Posts: 5
- Joined: Thu Jan 09, 2020 12:43 pm
- Location: Union Grove, WI
Re: WTB New3aCut Driver Body
Bump, still looking for more of these drivers if anyone has some. Thanks!!