368 Lincoln Y Block
Moderator: Team
Re: 368 Lincoln Y Block
Mercury Mermaid Dayton speed trials in 1957 My recreation. Now resides somewhere in Cali
You do not have the required permissions to view the files attached to this post.
Re: 368 Lincoln Y Block
Dyno Sheet from a guy in Cali who I consulted on building his engine and supplied a roller cam
You do not have the required permissions to view the files attached to this post.
Re: 368 Lincoln Y Block
I think it was a .060 over 368. Not sure on cam timing, probably in the 240s @ .050
Re: 368 Lincoln Y Block
IIRC, the car 4-bbls were small bolt pattern for the Holley tea-pot carbs; later Holleys require an adapter. The last truck version had the later Holley bolt pattern, but was considered worse runners for flow.
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering
Studebaker-Packard V8 Limited
Obsolete Engineering
Re: 368 Lincoln Y Block
He used the aluminum adapter to run an SBC manifold. Probably a Performer RPM or a Victor Jr. 750 Carb. None of the factory manifolds would make that much power.