We ran the composite rod in a daily driver, not sure of miles, but when we removed it and went to an electric pump, it appeared to look new out of the box, no sign of even being ran hardly...smokie wrote: ↑Wed Jan 10, 2024 3:21 pmHow well do those composite pushrods last? Will they work in a street/strip car?Procharged 434 wrote: ↑Wed Jan 10, 2024 9:27 am We use Melonized distributor gears on the Austempered cores with ZERO issues .. for the Fuel Pump rod, we use the Howards lightweight Composite Rod, it works on any camshaft core....
Comp cams cast iron hydraulic roller cam core
Moderator: Team
-
- Pro
- Posts: 222
- Joined: Mon Aug 10, 2009 3:41 pm
- Location:
Re: Comp cams cast iron hydraulic roller cam core
Re: Comp cams cast iron hydraulic roller cam core
I seen this on summits website. Stef's Fuel Pump Pushrods 65505 Ampco 45 bronze tip. Is that a better grade of bronze than the others (arp, comp cams, Howard's ECT) or the same thing?
Also, at what psi do you need a regulator before the carb?
Also, at what psi do you need a regulator before the carb?