Don Terrill’s Speed-Talk

These are the topics that David will cover during the Seminar
1) Airflow & port velocity - getting the best compromise
2) Holley's new 'Super Dominators' do they work as good as they look?
3) Making the best of your valve train with whatever your budget may be.
4) Five simple easily done and/or low buck power moves.

If you will be attending the seminar and would like to ask DV a question please post it here and I will forward it to DV to answer at the seminar. This will give him a heads up if some questions are likely to need supporting graphics. Please allow that, due to volume, he is unlikely to be able to answer every question sent his way.

Note please limit question to no more that 3 sentence or lines in your post.

Stan

Stan ; I can't get there, it would cost an arm and a leg, could you ask a couple of simple questions on my behalf ?
Is this seminar going to be recorded for others to view ?

When, where, how much? Who are guest speakers this time?

Loved it last time!

Just to be clear, this is the K&N-sponsored seminar in April, not the free Class A performance one in January?

lada ok wrote:Stan ; I can't get there, it would cost an arm and a leg, could you ask a couple of simple questions on my behalf ?
Is this seminar going to be recorded for others to view ?

I wish I could be I am not going to be there.

Stan

Does the burr texturing of ports work?



X2 on what Bill asked also.

MadBill wrote:Just to be clear, this is the K&N-sponsored seminar in April, not the free Class A performance one in January?

Bill,
Unless I am having a senior moment, this is for the Seminar @ Class 'A' Performance.

Stan

John Wallace wrote:Does the burr texturing of ports work?



X2 on what Bill asked also.

John,
The questions are only for people who will be in attendance. Are you going to be there? If so I will forward your question to DV.

Stan

Let just clarify this. Class 'A' Performance is opening of a new speed shop: Class 'A' Performance, 23720 Clawiter Rd., Hayward, California, 94545. http://www.classaperformance.com

They have invited DV to give a one-hour performance seminar followed by a Q & A session going on until all questions have been answered or 7:00 PM, whichever comes first. No tickets or admission are needed and burgers and other refreshments will be provided, free of charge. It starts at 2:00 PM on Saturday, Jan 31st at the new shop of Class 'A' Performance.

Stan

The questions are only for people who will be in attendance. Are you going to be there? If so I will forward your question to DV.

No, I won't be there.
I took it as asking questions that he would answer in general at the seminar.

Wish I could make it.
(hmmm... wonder what a plane ticket costs? )

I'll be there.

I'd really like to know about the beneficial limits of intake texture. How much does the booster style/droplet size affect the desired finish?

Thanks!

-Robert Williams

MrWOT wrote:I'll be there.

I'd really like to know about the beneficial limits of intake texture. How much does the booster style/droplet size affect the desired finish?

Thanks!

-Robert Williams

That should be an interesting topic based on what he covers in his early writings on induction systems. http://www.amazon.com/How-Build-Horsepo ... 1884089143