We are currently running on the new domain and server: www.Speed-Talk.com

IMPORTANT: Update your bookmarks to https://www.speed-talk.com/forum/
(Right-click the URL and select "Bookmark this link")

Howe 2 into 1 muffler

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
bigfoot
Member
Member
Posts: 159
Joined: Thu Mar 22, 2012 9:45 pm
Location:

Howe 2 into 1 muffler

Post by bigfoot » Fri Feb 14, 2020 8:52 pm

We run a limited late model in an asphalt oval track car. 380 HP with a 2 barrel carb..
There is new rule change this year..We can run a howe 2 into 1 muffler this year.. with a maximum of 18 " long tail pipe with maximum OD of 5 "...we run a X pipe. Are these mufflers better or should we just run 2 small straight thru mufflers ?? Maximum 3 inch.pipe.thanks

ProPower engines
Guru
Guru
Posts: 7814
Joined: Sun Jan 21, 2007 1:16 pm
Location: Victoria BC Canada

Re: Howe 2 into 1 muffler

Post by ProPower engines » Sat Feb 15, 2020 6:17 pm

Need more details on the engine.
What carb?? What Intake?? What Cylinder heads?? What headers are you running currently?? What collector size and length are they currently?? Where is the power band at?? What RPM do you come off corner at??This will determine what to do.
On restricted 2bbl engines a stepped header works better then a single larger tube header on a 2 into 1 system.
We found on limited 2bbl stuff 1 1/2 to 1 5/8 step with a 3" collector about 18"" gains 50HP and 50 Ft Lbs on some 2bbl sprint stuff we do over a single 1 3/4" tube size and larger 3 1/2" collector.
Also the Howe iron lung header system works very good on 2bbl stuff if you have not looked at them yet.
Real Race Cars Don't Have Doors

Post Reply