Sunnen ck-10 cylinder hone
Posted: Sat May 01, 2021 2:18 pm
Selling a Sunnen ck-10. Comes with the standard hone head and some stones. Comes with the stone and guide holders but majority of them are loose where the rods are held onto the holder. I have ran the machine just to test it. Everything seems functional and the dwell button does work. It is a very early model. The cylinder length adjustment only goes down to 4 1/2". Does not come with any oil. I haven't tested the separate filter/oil pump setup. Located in NW Ohio. $6800.