Speed-Talk is running on www.Speed-Talk.com

IMPORTANT: Update your bookmarks to https://www.speed-talk.com/forum/
(Right-click the URL and select "Bookmark this link")

Isky groove o matic

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
Racer71
Member
Member
Posts: 162
Joined: Mon Jun 24, 2019 12:36 pm
Location:

Isky groove o matic

Post by Racer71 »

Anyone have one they want to sell or rent? Wanting to do my 6.4 powerstroke it needs the larger one. If it would work on the smaller bore 4cyl engines I usually work with i would buy a new one and start offering to do them. My 6.4 needs the larger one.
BILL-C
Expert
Expert
Posts: 561
Joined: Thu Feb 07, 2008 9:57 pm
Location: Oakville, CT
Contact:

Re: Isky groove o matic

Post by BILL-C »

The cutter body is the same for both sizes. You can just buy the extra set of shoes and be set up for all the sizes.
Carlquist Competition Engines
Racer71
Member
Member
Posts: 162
Joined: Mon Jun 24, 2019 12:36 pm
Location:

Re: Isky groove o matic

Post by Racer71 »

Bill thanks for the reply, I may call them directly and price it that way. Do they seem to do a good job? Hadn’t seen anything really negative about them. I haven’t found anyone close by that can o-ring the heads for me then seen these thought it might be a viable option.
User avatar
Dave Koehler
Vendor
Posts: 6641
Joined: Mon Oct 04, 2004 11:19 pm
Location: Urbana, IL USA
Contact:

Re: Isky groove o matic

Post by Dave Koehler »

I have a local racer that has one for his own use. Probably done 6 blocks over the years.
He is more or less racing retired now.
I can contact him to see if he wants to part with it.
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Racer71
Member
Member
Posts: 162
Joined: Mon Jun 24, 2019 12:36 pm
Location:

Re: Isky groove o matic

Post by Racer71 »

Dave, that would be great, shoot me a om if he does have it and would like to part with it. Thanks!
User avatar
Dave Koehler
Vendor
Posts: 6641
Joined: Mon Oct 04, 2004 11:19 pm
Location: Urbana, IL USA
Contact:

Re: Isky groove o matic

Post by Dave Koehler »

no go on my contact. He hasn't come to grips with his semi retirement.
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Racer71
Member
Member
Posts: 162
Joined: Mon Jun 24, 2019 12:36 pm
Location:

Re: Isky groove o matic

Post by Racer71 »

Ok thanks Dave!
Post Reply