General engine tech -- Drag Racing to Circle Track
- Posts: 1018
- Joined: Thu Nov 21, 2013 12:52 am
I’ve had a set done it works but that first load of oil will end up with the break in material in it,and trying to break it in at home while trying load the engine per there break in procedure was kind of hassle and after I pulled the pistons later on the skirt size was where it needed to be.
- Posts: 87
- Joined: Sun Jul 21, 2019 8:35 pm
Good to hear the size was on target.I'm curious if it is used still. Past reviews were mostly positive . Am wondering how much/if it is used on higher HP endurance engines today.
- New Member
- Posts: 6
- Joined: Tue Dec 22, 2020 2:57 pm
- Location: NC
Ive used them on everthing from a 50Hp 4str outboard to 600Cuin offshore engines. Never had a problem.
TKM in Denton NC uses the coatings from street builds to Pro Mod .
- Posts: 1886
- Joined: Tue Aug 18, 2009 2:53 pm
First oil drain will make you scratch your head , 2nd was fine