Jon Schmidt Video cam rebuff
Moderator: David Vizard
-
- Guru
- Posts: 1787
- Joined: Thu Jan 15, 2015 12:19 pm
- Location:
Jon Schmidt Video cam rebuff
Hey guys - it's been a long time since I have been here but work overload and ill health have stolen so much of my time - -
Anyway I am sure most of you are aware that I now have a very active Youtube channel at 'David Vizard Performance' Check it out - it's climbing the subscription ladder fast.
One of my soon to be published video's is the last debate that John Schmidt and I had on cam events vs cam dynamics - which was the most important.
I found John a very difficult person to debate so I have decided to do a video on just this subject to show conclusively HE WAS WSRONG.
JOHN - ANY PROBLEMS WITH THIS?????
A SIMPLE YES OR NO WILL DO.
David Vizard
Anyway I am sure most of you are aware that I now have a very active Youtube channel at 'David Vizard Performance' Check it out - it's climbing the subscription ladder fast.
One of my soon to be published video's is the last debate that John Schmidt and I had on cam events vs cam dynamics - which was the most important.
I found John a very difficult person to debate so I have decided to do a video on just this subject to show conclusively HE WAS WSRONG.
JOHN - ANY PROBLEMS WITH THIS?????
A SIMPLE YES OR NO WILL DO.
David Vizard
David Vizard Small Group Performance Seminars - held about every 2 months. My shop or yours. Contact for seminar deails - davidvizardseminar@gmail.com for details.
-
- Guru
- Posts: 1787
- Joined: Thu Jan 15, 2015 12:19 pm
- Location:
Re: Jon Schmidt Video cam rebuff
Guys'
I don't think Jon has seen this yet. Maybe I should post in the general section!
DV
I don't think Jon has seen this yet. Maybe I should post in the general section!
DV
David Vizard Small Group Performance Seminars - held about every 2 months. My shop or yours. Contact for seminar deails - davidvizardseminar@gmail.com for details.
Re: Jon Schmidt Video cam rebuff
Watching for the Video.
Ignorance leads to confidence more often than knowledge does.
Nah, I'm not leaving myself out of the ignorant brigade....at times.
Nah, I'm not leaving myself out of the ignorant brigade....at times.
-
- Posts: 0
- Joined: Sat Jan 27, 2018 8:00 pm
- Location: missouri
Re: Jon Schmidt Video cam rebuff
Well guys let me tell you this,ive been doing race engines for over 30 years and used almost every cam out there. When i started using davids cam specs. well the rest is history. The other cam companys arnt even close.
-
- Guru
- Posts: 1787
- Joined: Thu Jan 15, 2015 12:19 pm
- Location:
Re: Jon Schmidt Video cam rebuff
THE JON SCHMIDT ROAST IS NOW RUNNING ON YOUTUBE AND GETTING SOME RAVE REVIEWS.
GO CHECK IT OUT AND PLEASE COMMENT!
DV
GO CHECK IT OUT AND PLEASE COMMENT!
DV
David Vizard Small Group Performance Seminars - held about every 2 months. My shop or yours. Contact for seminar deails - davidvizardseminar@gmail.com for details.
Re: Jon Schmidt Video cam rebuff
David Vizard wrote:
> [b][i][size=150]THE JON SCHMIDT ROAST IS NOW RUNNING ON YOUTUBE AND GETTING
> SOME RAVE REVIEWS.
> GO CHECK IT OUT AND PLEASE COMMENT!
> DV[/size][/i][/b]
This really comes off as you bashing someone just to promote your self.
> [b][i][size=150]THE JON SCHMIDT ROAST IS NOW RUNNING ON YOUTUBE AND GETTING
> SOME RAVE REVIEWS.
> GO CHECK IT OUT AND PLEASE COMMENT!
> DV[/size][/i][/b]
This really comes off as you bashing someone just to promote your self.
Please Note!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
-
- Guru
- Posts: 1787
- Joined: Thu Jan 15, 2015 12:19 pm
- Location:
Re: Jon Schmidt Video cam rebuff
Gary,
Sorry you saw it as that but this guy is dishing out BS and I know for a fact that neither of us like that.
How about you reserve final judgement until you have seen part 2 on Monday the 12 at 4 pm.
DV
David Vizard Small Group Performance Seminars - held about every 2 months. My shop or yours. Contact for seminar deails - davidvizardseminar@gmail.com for details.
-
- Vendor
- Posts: 11003
- Joined: Mon Apr 11, 2005 2:30 am
- Location: CA
Re: Jon Schmidt Video cam rebuff
Anyone that is interested in understanding cam design would do well to view / read the following:
COMP Cams' Billy Godbold
https://www.youtube.com/watch?v=1jPxdfPdhdU
https://www.youtube.com/watch?v=NB-dbpVCOuo
https://www.motortrend.com/how-to/ctrp- ... -dynamics/
Professor Blair and Associates
http://www.profblairandassociates.com/p ... 20Lift.pdf
http://www.profblairandassociates.com/p ... ration.pdf
https://www.amazon.com/Design-Simulatio ... 0768004403
http://www.profblairandassociates.com/G ... n_gpb.html
Beast: The Top Secret Ilmor-Penske Engine That Shocked the Racing World at the Indy 500
https://www.amazon.com/Beast-Secret-Ilm ... 1642340103
Introduction to Analytical Methods for Internal Combustion Engine Cam Mechanisms 2013th Edition by J J Williams
(This is the cam design method that was used for the Ilmor pushrod engine that won Indy 500)
https://www.amazon.com/Introduction-Ana ... 1447145631
Design and Manufacture of Camshafts: Robert Norton
Cam Design Handbook: Dynamics and Accuracy 1st Edition by Harold Rothbart
https://www.amazon.com/Cam-Design-Handb ... 0071377573
Mechanics and Design of Cam Mechanisms by Fan Y. Chen
https://www.amazon.com/Mechanics-Design ... 179&sr=1-1
COMP Cams' Billy Godbold
https://www.youtube.com/watch?v=1jPxdfPdhdU
https://www.youtube.com/watch?v=NB-dbpVCOuo
https://www.motortrend.com/how-to/ctrp- ... -dynamics/
Professor Blair and Associates
http://www.profblairandassociates.com/p ... 20Lift.pdf
http://www.profblairandassociates.com/p ... ration.pdf
https://www.amazon.com/Design-Simulatio ... 0768004403
http://www.profblairandassociates.com/G ... n_gpb.html
Beast: The Top Secret Ilmor-Penske Engine That Shocked the Racing World at the Indy 500
https://www.amazon.com/Beast-Secret-Ilm ... 1642340103
Introduction to Analytical Methods for Internal Combustion Engine Cam Mechanisms 2013th Edition by J J Williams
(This is the cam design method that was used for the Ilmor pushrod engine that won Indy 500)
https://www.amazon.com/Introduction-Ana ... 1447145631
Design and Manufacture of Camshafts: Robert Norton
Cam Design Handbook: Dynamics and Accuracy 1st Edition by Harold Rothbart
https://www.amazon.com/Cam-Design-Handb ... 0071377573
Mechanics and Design of Cam Mechanisms by Fan Y. Chen
https://www.amazon.com/Mechanics-Design ... 179&sr=1-1
Helping to Deliver the Promise of Flying Cars
-
- Vendor
- Posts: 11003
- Joined: Mon Apr 11, 2005 2:30 am
- Location: CA
Re: Jon Schmidt Video cam rebuff
For anyone that thinks 10 year old cam tech is relevant to today.
I recommend you view this.
https://www.youtube.com/watch?v=K1DFrWcvTuc
I recommend you view this.
https://www.youtube.com/watch?v=K1DFrWcvTuc
Helping to Deliver the Promise of Flying Cars
Re: Jon Schmidt Video cam rebuff
that 128 chart will get you close I'm sure for a chevy small block muscle car rough idle catalog cam. Simulation is better of course so you can design for engine characteristics. For a set of heads on a given bore and stroke you really get to decide what you want the power to be like. Truly enjoyed your cyliner head book, was fun to read about my employers