Speed-Talk is running on www.Speed-Talk.com

IMPORTANT: Update your bookmarks to https://www.speed-talk.com/forum/
(Right-click the URL and select "Bookmark this link")

.375 ball head drivers

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
bentvalves
Pro
Pro
Posts: 418
Joined: Mon Dec 12, 2016 3:37 pm
Location:

.375 ball head drivers

Post by bentvalves »

anybody have anything, with or without the tool holding "forks" ?
Bossman
Member
Member
Posts: 98
Joined: Sat Sep 17, 2016 12:05 pm
Location:

Re: .375 ball head drivers

Post by Bossman »

i have a few for the large valve seats 2 -2.5 dia.that i don't use anymore
bentvalves
Pro
Pro
Posts: 418
Joined: Mon Dec 12, 2016 3:37 pm
Location:

Re: .375 ball head drivers

Post by bentvalves »

Bossman wrote: Fri Sep 16, 2022 11:55 am i have a few for the large valve seats 2 -2.5 dia.that i don't use anymore
so the tool holding "fork" is for the larger stuff. but the ball head driver is a ball head driver I assume?

could you send me some pics?

Interested.
Bossman
Member
Member
Posts: 98
Joined: Sat Sep 17, 2016 12:05 pm
Location:

Re: .375 ball head drivers

Post by Bossman »

no it's specific to the size of seat you use it on, the smaller one have a few different size range but the large ones i have are for 2' and larger seats up to about 3 '
Bossman
Member
Member
Posts: 98
Joined: Sat Sep 17, 2016 12:05 pm
Location:

Re: .375 ball head drivers

Post by Bossman »

bentvalves wrote: Thu Sep 22, 2022 10:18 am
Bossman wrote: Fri Sep 16, 2022 11:55 am i have a few for the large valve seats 2 -2.5 dia.that i don't use anymore
so the tool holding "fork" is for the larger stuff. but the ball head driver is a ball head driver I assume?

could you send me some pics?

Interested.
i'll get you some pics
Bossman
Member
Member
Posts: 98
Joined: Sat Sep 17, 2016 12:05 pm
Location:

Re: .375 ball head drivers

Post by Bossman »

Bossman wrote: Sun Oct 16, 2022 4:07 pm
bentvalves wrote: Thu Sep 22, 2022 10:18 am
Bossman wrote: Fri Sep 16, 2022 11:55 am i have a few for the large valve seats 2 -2.5 dia.that i don't use anymore
so the tool holding "fork" is for the larger stuff. but the ball head driver is a ball head driver I assume?

could you send me some pics?

Interested.
i'll get you some pics
Man i appologize i just made a note to get you some pics tomorrow, we have been balls to the wall w/ work
Bossman
Member
Member
Posts: 98
Joined: Sat Sep 17, 2016 12:05 pm
Location:

Re: .375 ball head drivers

Post by Bossman »

IMG_0916.JPG
picture of ball heads together shows the large and smaller ball head tool w/ same ball head size, tape shows from center of pilot to outside distance of cutter blade which would be roughly 3"
You do not have the required permissions to view the files attached to this post.
scotts439
Member
Member
Posts: 194
Joined: Wed Feb 16, 2011 10:50 am
Location: mass

Re: .375 ball head drivers

Post by scotts439 »

did these sell to OP? If still for sale, please PM me the price.
Post Reply